Author Topic: Repair Minato 1863 Eprom programmer schematics  (Read 1842 times)

0 Members and 1 Guest are viewing this topic.

Offline xantia_99Topic starter

  • Contributor
  • Posts: 39
  • Country: se
Repair Minato 1863 Eprom programmer schematics
« on: April 30, 2015, 08:28:50 am »
Hi

I got a Minato 1863 eprom programmer that have serios problem with the keyboard.
http://www.timonradiosivut.fi/Minato_1863.html

Does anyone have service manual and schematics for this euipment. As I  want to program some old TMS2532 with 25 Volt needs. I have not so many choices. Minato company does not have it.

Best Regards


   
 

Offline PA0PBZ

  • Super Contributor
  • ***
  • Posts: 5127
  • Country: nl
Re: Repair Minato 1863 Eprom programmer schematics
« Reply #1 on: April 30, 2015, 08:49:00 am »
Hi

I got a Minato 1863 eprom programmer that have serios problem with the keyboard.
http://www.timonradiosivut.fi/Minato_1863.html

Does anyone have service manual and schematics for this euipment. As I  want to program some old TMS2532 with 25 Volt needs. I have not so many choices. Minato company does not have it.


The foil keyboard has probably worn out or got corroded inside. No need for schematics to check that and if it's gone and you really still want to use the device replace it with a switch matrix.
Keyboard error: Press F1 to continue.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf