« previous next »
Pages: Prev 1 2 [3]  All   Go Down

Author Topic: Smoke und fire after switching on old electronics TEK DSA 602  (Read 11512 times)

0 Members and 1 Guest are viewing this topic.

Offline Johnny10

  • Frequent Contributor
  • **
  • Posts: 899
  • Country: us
Re: Smoke und fire after switching on old electronics TEK DSA 602
« Reply #50 on: October 11, 2017, 11:51:46 pm »
Just now getting back to the repair desk.

These are the X2 caps I ordered for my units.
Logged
Tektronix TDS7104, DMM4050, HP 3561A, HP 35665, Tek 2465A, HP8903B, DSA602A, Tek 7854, 7834, HP3457A, Tek 575, 576, 577 Curve Tracers, Datron 4000, Datron 4000A, DOS4EVER uTracer, HP5335A, EIP534B 20GHz Frequency Counter, TrueTime Rubidium, Sencore LC102, Tek TG506, TG501, SG503, HP 8568B
 

Offline PhysikfanTopic starter

  • Regular Contributor
  • *
  • Posts: 125
  • Country: 00
Re: Smoke und fire after switching on old electronics TEK DSA 602
« Reply #51 on: October 12, 2017, 01:57:48 am »
Please how much did you pay for these capacitors and
please could you tell me your source?
Logged
 

Offline Johnny10

  • Frequent Contributor
  • **
  • Posts: 899
  • Country: us
Re: Smoke und fire after switching on old electronics TEK DSA 602
« Reply #52 on: October 12, 2017, 02:02:18 am »
Logged
Tektronix TDS7104, DMM4050, HP 3561A, HP 35665, Tek 2465A, HP8903B, DSA602A, Tek 7854, 7834, HP3457A, Tek 575, 576, 577 Curve Tracers, Datron 4000, Datron 4000A, DOS4EVER uTracer, HP5335A, EIP534B 20GHz Frequency Counter, TrueTime Rubidium, Sencore LC102, Tek TG506, TG501, SG503, HP 8568B
 

Offline AF6LJ

  • Supporter
  • ****
  • Posts: 2902
  • Country: us
Re: Smoke und fire after switching on old electronics TEK DSA 602
« Reply #53 on: October 12, 2017, 03:18:38 am »
Considering the upcoming projects I must be very careful after reading this thread.
Being cautious as I am and having the experience of a few messy explosions in the past, I have been very lucky these last several years.
It is not the BANG or the SMELL that is so bad, it's cleaning up the mess....  :palm:
Logged
Sue AF6LJ
 

Offline stj

  • Super Contributor
  • ***
  • Posts: 2155
  • Country: gb
Re: Smoke und fire after switching on old electronics TEK DSA 602
« Reply #54 on: October 12, 2017, 10:14:17 am »
if you want very good caps at a cheap price, panasonic are very good.
Logged
 

Offline bitshape

  • Contributor
  • Posts: 31
  • Country: nl
Re: Smoke und fire after switching on old electronics TEK DSA 602
« Reply #55 on: October 17, 2017, 08:31:34 am »
Quote from: stj on October 12, 2017, 10:14:17 am
if you want very good caps at a cheap price, panasonic are very good.
Indeed, don't know why people want to use the cheap shenzen-market (CQC) parts, especially for replacement of line-filter X & Y caps in quality equipment.

Here in Europe you can buy the Panasonic/Matsushita-parts @ Conrad & Reichelt (or Mouser/Digikey), also you could look for the modern 'red' WIMA-X2 & Y2 caps (Germany made) if you search for the right partnumber chosen from the datasheet > that's just my way of working.  ;)
I will attach the datasheets of the parts I use for this application:
« Last Edit: October 17, 2017, 09:55:19 am by bitshape »
Logged
 
The following users thanked this post: bitseeker
Pages: Prev 1 2 [3]  All   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee