Author Topic: Hakko Fr-300 desoldering tool  (Read 96072 times)

0 Members and 1 Guest are viewing this topic.

Offline SjokoladeTopic starter

  • Regular Contributor
  • *
  • Posts: 93
  • Country: no
Hakko Fr-300 desoldering tool
« on: February 28, 2014, 04:37:55 pm »
Anyone seen the Fr-300 or even tested it ?

Heard rumors that the Fr-300 is to replace the 808 that is out of production.

Pictures ?

If at first you do succeed try not to look astonished
 

Offline SjokoladeTopic starter

  • Regular Contributor
  • *
  • Posts: 93
  • Country: no
Re: Hakko Fr-300 desoldering tool
« Reply #1 on: March 03, 2014, 06:44:09 pm »

Not much info to find on the FR-300


Main switch and temperature adjustment built in to the handle.
Single touch nozzle replacement.
Excellent heat recovery for lead free application with closed-loop heat control

Power consumpton       95W (Heater 80W)
Temperature range      350-500 C
Nozzle to ground resistance   <2 ohm
Nozzle to ground potential   <2mmV
Vacuum pump         Diaphragm pump
Vacuum pressure         610mmHg
Dimension         210(W)x192(H)x47(D)mm




If at first you do succeed try not to look astonished
 

Offline neslekkim

  • Super Contributor
  • ***
  • Posts: 1305
  • Country: no
 

Offline SjokoladeTopic starter

  • Regular Contributor
  • *
  • Posts: 93
  • Country: no
Re: Hakko Fr-300 desoldering tool
« Reply #3 on: March 03, 2014, 07:12:40 pm »
Yes I guess Hakko is waiting to release information about the Fr-300, saw those links you posted earlier but not early enough to download the Hakko Fr-300 press release that was removed from n1a.goexposoftware.

I like Hakko's design better then JBC actually :)

If at first you do succeed try not to look astonished
 

Offline neslekkim

  • Super Contributor
  • ***
  • Posts: 1305
  • Country: no
Re: Hakko Fr-300 desoldering tool
« Reply #4 on: March 03, 2014, 07:19:06 pm »
Hakko is typically very difficult and expensive to get here in Norway.. Emagenturer is going to skyrocket this price also I guess.
 

Offline Frost

  • Regular Contributor
  • *
  • Posts: 170
  • Country: de
Re: Hakko Fr-300 desoldering tool
« Reply #5 on: March 03, 2014, 07:30:03 pm »
Hakko is typically very difficult and expensive to get here in Norway.

Not only in Norway, the same here in Germany :--
 

Offline neslekkim

  • Super Contributor
  • ***
  • Posts: 1305
  • Country: no
Re: Hakko Fr-300 desoldering tool
« Reply #6 on: March 03, 2014, 07:33:56 pm »
Have you seen the prices in UK?, those are much better, but they don't sell outside UK, I tried to ask if it was possible to buy one at the makerfaire, but they are far outside anywhere, and you had to order in advance, witch rules out ordering to hotels etc.

http://www.dancap.co.uk/

 

Offline echen1024

  • Super Contributor
  • ***
  • Posts: 1660
  • Country: us
  • 15 yo Future EE
Re: Hakko Fr-300 desoldering tool
« Reply #7 on: March 04, 2014, 03:01:24 am »
Times like this I love living in the USA.
I'm not saying we should kill all stupid people. I'm just saying that we should remove all product safety labels and let natural selection do its work.

https://www.youtube.com/user/echen1024
 

Offline tsmith35

  • Frequent Contributor
  • **
  • Posts: 265
  • Country: us
Re: Hakko Fr-300 desoldering tool
« Reply #8 on: March 04, 2014, 03:51:04 am »
Hakko prices are low in the US, but JBC prices are high. Good and bad.

As an aside, do the JBC capacitive touch screens work with gloves? I know a lot of techs wear gloves while handling components, so just curious.
 

Offline neslekkim

  • Super Contributor
  • ***
  • Posts: 1305
  • Country: no
Re: Hakko Fr-300 desoldering tool
« Reply #9 on: March 15, 2014, 09:50:30 pm »
 

Offline SjokoladeTopic starter

  • Regular Contributor
  • *
  • Posts: 93
  • Country: no
Re: Hakko Fr-300 desoldering tool
« Reply #10 on: March 15, 2014, 10:14:55 pm »
Will pre-order one of these, Norwegian price is 2950,- NOK + mva and will be available in april/may.
If at first you do succeed try not to look astonished
 
The following users thanked this post: Chris56000

Offline gmit77

  • Regular Contributor
  • *
  • !
  • Posts: 146
  • Country: it
    • Batter Fly
Re: Hakko Fr-300 desoldering tool
« Reply #11 on: March 19, 2014, 11:20:48 am »
hello, here are some more info about the coming FR-300:
- it will come with 1mm nozle as standard (N50-04)
- 808 nozzles will fit FR-300
- new nozzle models
  • N50-01 : S-NOZZLE 0.8mm ... Euro 11,30 + VAT
  • N50-02 : S-NOZZLE 1.0mm ... Euro 11,30 + VAT
  • N50-03 : NOZZLE 0.8mm ... Euro 11,30 + VAT
  • N50-04 : NOZZLE 1.0mm ... Euro 11,30 + VAT
  • N50-05 : NOZZLE 1.3mm ... Euro 11,30 + VAT
  • N50-06 : NOZZLE 1.6mm  ... Euro 11,30 + VAT
- FR-300 ... Euro 235 + VAT

we will confirm the prices once the items will be in our stock.

for Eurpoean customers: you can book your unit starting this evening at our web shop

more questions? ask  :-+

ciao
Batter Fly
never stop innovating
 

Offline neslekkim

  • Super Contributor
  • ***
  • Posts: 1305
  • Country: no
Re: Hakko Fr-300 desoldering tool
« Reply #12 on: March 19, 2014, 11:29:04 am »
Link to the shop?
Will you also sell to Norway?
 

Offline neslekkim

  • Super Contributor
  • ***
  • Posts: 1305
  • Country: no
Re: Hakko Fr-300 desoldering tool
« Reply #13 on: March 19, 2014, 11:35:35 am »
Will pre-order one of these, Norwegian price is 2950,- NOK + mva and will be available in april/may.

Who will sell at that price?, the older 808 is crazy priced at the distributor in Norway.. (Emag.. )
 

Offline gmit77

  • Regular Contributor
  • *
  • !
  • Posts: 146
  • Country: it
    • Batter Fly
Re: Hakko Fr-300 desoldering tool
« Reply #14 on: March 19, 2014, 11:40:43 am »
hello I will post the link of the FR-300 in the afternoon.
Batter Fly web shop link is www.batterfly.com/shop
here is the link to check our shipment cost: http://www.batterfly.com/shop/consegna

I will update the post with the FR-300 link soon

thanks
Batter Fly
never stop innovating
 

Offline neslekkim

  • Super Contributor
  • ***
  • Posts: 1305
  • Country: no
Re: Hakko Fr-300 desoldering tool
« Reply #15 on: March 19, 2014, 11:53:20 am »
Why is shipping to sweden €10 cheaper than Norway?, our contries lies next to each other :)

And what is IVA?, tax?, Norway is outside EU, so I expect TAX to be excluded, since we need to pay tax in import here.
 

Offline gmit77

  • Regular Contributor
  • *
  • !
  • Posts: 146
  • Country: it
    • Batter Fly
Re: Hakko Fr-300 desoldering tool
« Reply #16 on: March 19, 2014, 11:58:49 am »
GOOD QUESTION!!! mistery of transporter price list ...
VAT will be not charged automatically for those countries which are outside of EU and of course for every oredrs coming from a company
Batter Fly
never stop innovating
 

Offline gmit77

  • Regular Contributor
  • *
  • !
  • Posts: 146
  • Country: it
    • Batter Fly
Re: Hakko Fr-300 desoldering tool
« Reply #17 on: March 19, 2014, 01:28:53 pm »
as promised, here is the link http://www.batterfly.com/shop/hakko-fr-300
Batter Fly
never stop innovating
 

Offline neslekkim

  • Super Contributor
  • ***
  • Posts: 1305
  • Country: no
Re: Hakko Fr-300 desoldering tool
« Reply #18 on: March 19, 2014, 01:42:02 pm »
This is of course the european version with 220volts?, and EU plug?
Any idea of when it will be available?

Will be interresting to see reviews and comparisions of this one to the 808.
 

Offline gmit77

  • Regular Contributor
  • *
  • !
  • Posts: 146
  • Country: it
    • Batter Fly
Re: Hakko Fr-300 desoldering tool
« Reply #19 on: March 19, 2014, 01:51:51 pm »
yes EU version  :-+
I think we will be able to ship the first units end of April.
Order booking is open from today in our web shop
Batter Fly
never stop innovating
 

Offline SjokoladeTopic starter

  • Regular Contributor
  • *
  • Posts: 93
  • Country: no
Re: Hakko Fr-300 desoldering tool
« Reply #20 on: March 19, 2014, 04:36:53 pm »
Will pre-order one of these, Norwegian price is 2950,- NOK + mva and will be available in april/may.

Who will sell at that price?, the older 808 is crazy priced at the distributor in Norway.. (Emag.. )

EM Agenturer AS will sell the Fr 300 for that price

Quote
Prisen på FR-300 blir 2950,- og spissene vil koste 135,-

The old 808 is cheap now.. ehh cheaper 1/2 price.

Quote
Denne kan du få for 2500,- og demo modellen kan du få for 2000,-

If at first you do succeed try not to look astonished
 

Offline mariush

  • Super Contributor
  • ***
  • Posts: 4983
  • Country: ro
  • .
Re: Hakko Fr-300 desoldering tool
« Reply #21 on: March 19, 2014, 05:06:11 pm »
At 235 euro, it's just crazy... I add 24% VAT and I'm looking at 291 euro.. with 30 euro shipping I'm looking at 320 euro. 

I can buy the US FX-808 from eBay for 180$, plus 40$ shipping, or about 220$ (159 euro): http://www.ebay.com/itm/Hakko-808-KIT-P-808-5-Desoldering-Gun-Tool-120-VAC-Handheld-Self-Contained-Kit-/380841853916?pt=LH_DefaultDomain_0&hash=item58abf183dc

If I have some bad luck , I may even have to pay VAT that would be another 20-30 euro.. so overall less than 180 euro.  A 220-240v -> 110v transformer doesn't cost 150 euro.
 

Offline neslekkim

  • Super Contributor
  • ***
  • Posts: 1305
  • Country: no
Re: Hakko Fr-300 desoldering tool
« Reply #22 on: March 19, 2014, 05:40:39 pm »
A 220-240v -> 110v transformer doesn't cost 150 euro.

Someone on the forums here have done that, but needed somewhat beefier transformer than what the 808 should require..
 

Offline mariush

  • Super Contributor
  • ***
  • Posts: 4983
  • Country: ro
  • .
Re: Hakko Fr-300 desoldering tool
« Reply #23 on: March 19, 2014, 05:51:39 pm »
Exactly. A 100VA transformer is 19 pounds, about 25-26 uk pounds with shipping and VAT ... around 25 euro: http://uk.farnell.com/pro-power/ctfcs100-50u/transformer-100va-2-x-50v/dp/1780899

A 200VA transformer is about 40 euro VAT included : http://uk.farnell.com/pro-power/ctfcs200-50u/transformer-200va-2-x-50v/dp/1780907

No problem with difference in frequency, the tool will handle it.
 

Offline jpb

  • Super Contributor
  • ***
  • Posts: 1771
  • Country: gb
Re: Hakko Fr-300 desoldering tool
« Reply #24 on: March 26, 2014, 07:13:46 pm »
I contacted dancap about the Fr300 and was told that it won't be available in the UK until June.

There is nothing on the Hakko site yet either (at least not under products).

So are they selling some before officially releasing them?
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf