Author Topic: need help matching chip antenna M620720  (Read 1114 times)

0 Members and 1 Guest are viewing this topic.

Offline bug13Topic starter

  • Regular Contributor
  • *
  • Posts: 56
  • Country: nz
need help matching chip antenna M620720
« on: November 28, 2017, 04:30:41 am »
Hi guys

I have done a couple PCB antennas matching, but I have trouble matching this chip antenna M620720 with a PI network to 50ohm:
M620720 https://www.ethertronics.com/wp-content/uploads/2016/11/M620720-ISM-868-915MHz-Ethertronics-Savvi-Ceramic-antenna-datasheet-20161020.pdf

I found an example in this developer guide:
Multitech xDot https://www.multitech.com/documents/publications/manuals/s000645.pdf

In P33, they use two caps? I don't understand this configuration, can someone give me some pointers? Thanks a lot!

PS:
  • I am able to turn the frequency with the minor and major turning, but with no luck matching it 50ohm.
    I only have a USB desktop VNA


« Last Edit: November 28, 2017, 04:33:42 am by bug13 »
Zhuhua Wu
A guy who creates stories to tell machines to do stuff.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf