Author Topic: Video: Using SimSmith to design L matching network  (Read 1038 times)

0 Members and 1 Guest are viewing this topic.

Offline w2aewTopic starter

  • Super Contributor
  • ***
  • Posts: 1780
  • Country: us
  • I usTa cuDnt speL enjinere, noW I aR wuN
    • My YouTube Channel
Video: Using SimSmith to design L matching network
« on: February 12, 2018, 11:05:29 pm »
This video shows how to use the SimSmith software program to design L matching networks for the same complex load shown in video #276.  Here are links to download SimSmith, as well as to Larry W0QE's excellent YouTube site with SimSmith tutorials.

W0QE SimSmith Tutorials and more:
https://www.youtube.com/channel/UCKSyLSu4fm_1RHoO3Jvk4YQ
AE6TY SimSmith site:
http://www.ae6ty.com/Smith_Charts.html

*Poor Audio Quality - yes, I know the SNR of the audio in this video is not great.  This was my first video using a screen capture utility instead of my video camera.  My PC mic isn't very good, and recorded very low volume. I had to boost the audio using Handbrake, and that boosted the noise too.  Sorry about that.  Will try to improved upon this for future videos using screen capture.


YouTube channel: https://www.youtube.com/w2aew
FAE for Tektronix
Technical Coordinator for the ARRL Northern NJ Section
 
The following users thanked this post: andyturk, nugglix, CNe7532294


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf