EEVblog > News/Suggestions/Help

300vdc power supply design?

(1/2) > >>

ShaunAndFRED:
Hi Dave and EEVBloggers!

I loved the entire series on designing the lab bench supply, and I was wondering if you might feel so inspired to start again... but with a 300 vdc bench supply? Not to say do the entire design start to finish again, but I thought it would be cool to talk about the different challenges and design elements of higher voltage supplies. I guess I felt inspired by the Xantrex teardown. Maybe that's just me though. Anyway, love the blog! Keep it up!

Rerouter:
its really a specilised bit of kit, however if you want something like it, my first though would be use an isolation transformer with a few turns short on the output, rectified mains is about 335V DC, from there you can get away with linear stage probably loosing 10V for a nice stable output, as for linear voltage regulation for very high voltages, you can get away with a 5V op amp suprisingly, you have an npn on your op amps output, that is used to pull down a main pass element pnp's base, and turn it irrespective of the voltage its regualting, the transistors just have to be able to cope with the voltage (quite a few capable)

if you want fancy like the torn down one, its pretty much buy or buggered, as a whole lot of time and thought went into that thing,

Psi:
If you want variable output up to 300V you can make it a little easier and safer by first designing and building a low voltage variable AC power supply, (say 40V or example).

When you have it all working add a stepup transformer plus bridge rectifier and you have variable high voltage DC.
You can even add optoisolated feedback so it regulates from the high voltage output.

At least when doing it that way most of the design and testing is at safe voltages.
However it is a little more complex as your going
AC mains into step down transformer and bridge -> DC 40v -> regulated voltage (0-28AC) --> stepup transformer (28-212v) -> bridge rectifier -> DC 0-300v

nitro2k01:

--- Quote from: Psi on October 23, 2012, 11:22:50 am ---DC 40v -> regulated voltage (0-28AC)
--- End quote ---
Wait what, DC->AC? That doesn't sound like quite the easy beginnner's project...

Bored@Work:
This is one of those projects were if you need to ask how to do it you probably shouldn't do it.

Navigation

[0] Message Index

[#] Next page