EEVblog Electronics Community Forum
Products => Test Equipment => Topic started by: jordanp123 on May 05, 2018, 11:17:57 pm
-
Just looking through the BM235 manual for fuse replacement and it lists the SIBA 7012540.0,4 as a suitable replacement (At a lower breaking voltage), but looking at the specifications sheet it doesn't list a DC breaking voltage. It seems odd to recommend a fuse thats rated only for AC current breakage in a DMM, or did I miss the DC listing somewhere?
-
Dave's normally got them in a pack from his shop but the link returns 404 error.
Sent him a mail about it including a link back to here.
-
The fuse is only there for the AC side. DC conditions are handled using circuits.
-
Dave's normally got them in a pack from his shop but the link returns 404 error.
Sent him a mail about it including a link back to here.
Hello,
What link resulted in a 404 error and where did you click the link? The URL for the fuse has changed.
As a side note we currently have no stock :(.
-
Dave's normally got them in a pack from his shop but the link returns 404 error.
Sent him a mail about it including a link back to here.
Hello,
What link resulted in a 404 error and where did you click the link? The URL for the fuse has changed.
As a side note we currently have no stock :(.
It was this one from the shop drop-down menu but it's working now. :-//
https://www.eevblog.com/product/multimeter-fuse-pack/ (https://www.eevblog.com/product/multimeter-fuse-pack/)
There's a least one other link there that's still returning 404.