« previous next »
Pages: [1]   Go Down

Author Topic: Picoscope 6000 series PSU  (Read 1217 times)

0 Members and 1 Guest are viewing this topic.

Online doktor pytaTopic starter

  • Frequent Contributor
  • **
  • Posts: 488
  • Country: pl
Picoscope 6000 series PSU
« on: March 22, 2016, 10:59:08 am »
Hi,
Is there any Picoscope 6000 series user here?
I have one without a power supply.
From the manual I know it should provide 12VDC, 4A, center positive.
From my observations it uses 2,1/5,5 DC power connector.

Should the PSU have output negative connected directly to the PE in the AC mains plug ? (I can buy PSU with and without this link).
Could someone send a closer picture of the original PSU?

Thanks!
Logged
 

Offline ADT123

  • Regular Contributor
  • *
  • Posts: 67
  • Country: gb
    • Pico Technology
Re: Picoscope 6000 series PSU
« Reply #1 on: March 22, 2016, 01:27:54 pm »
Does this help?

https://www.picotech.com/accessories/miscellaneous/ac-adaptor-12-v

2 pin adaptors so not connected to ground.
Logged
Disclaimer: I have worked for Pico Technology for over 30 years and designed some of their early oscilloscopes. 

We are always recruiting talented hardware and software engineers! Happy to answer Pico related questions when time permits but here as electronics is a hobby
 

Online doktor pytaTopic starter

  • Frequent Contributor
  • **
  • Posts: 488
  • Country: pl
Re: Picoscope 6000 series PSU
« Reply #2 on: March 22, 2016, 02:16:44 pm »
Yes, thanks!
However a closer picture would also be useful :)
« Last Edit: March 22, 2016, 06:46:01 pm by doktor pyta »
Logged
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee