Continuity test with Fluke TL224

[PowerNet]

Hi all,

So I got my TLK-225 kit and in it is the Silicon Fluke TL224 leads, which no dout a must have.

The issue is with the continuity test, I can get it to fail most of the time.

I have tested it with the standard lead that came with the 87V and works every time.

Has anyone else experienced this issue ?

Im using the TL224 lead with the TP175 probes.


Thanks

[BMack]

I don't have that problem with my TL224s, I have several pairs of those leads as backups and have tested all. I use the TP2 and TL224s with my 87Vs. I have a set of the TP175 at work I can test.

[retiredcaps]

You should be able to narrow down if one of the test leads/connectors is broken or not with another pair of good ones by mixing and matching everything.