Low Cost PCB's Low Cost Components

Author Topic: xx 1061 branded lcz meter  (Read 1145 times)

0 Members and 1 Guest are viewing this topic.

Offline coromonadalix

  • Regular Contributor
  • *
  • Posts: 236
  • Country: ca
xx 1061 branded lcz meter
« on: April 04, 2015, 06:02:00 AM »
hello   
I have won on ebay an zentech 1061 lcz meter,  it is sold under many brand ...    i am trying to find an user manual for it, with no luck.

I whant to know if i can calibrate my kelvin probes, i have a few milli ohms of impedance (0.9 ohms)  i whant to remove from measurements if possible, and i suspect my probe to be slightly defective, the wires are beginning to crack on the shielding,  damaged and pinched  on a few places

Sended a few Emails to the companies still no luck ??  has any one played with thoses  meters ?

thks guys
 

Offline commongrounder

  • Frequent Contributor
  • **
  • Posts: 255
  • Country: us
Re: xx 1061 branded lcz meter
« Reply #1 on: April 04, 2015, 06:31:30 AM »
Have you zeroed your test leads with the open and short cal buttons? That will remove the lead resistance, inductance and capacitance from your test results. :)
 

Offline coromonadalix

  • Regular Contributor
  • *
  • Posts: 236
  • Country: ca
Re: xx 1061 branded lcz meter
« Reply #2 on: April 04, 2015, 01:53:08 PM »
tried   but i dont know how to do it properly, i see open  and short on the display, but after that  i dont know how to calibrate it

i will try on ebay an seller who sell them,  if he whant to ship me a copy of the user manual.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf