Author Topic: Enabling Options for Rohde & Schwarz FSH series (discontinued) analyzers (Read 8863 times)

scopeman · « **on:** March 27, 2018, 12:23:54 am »

Has anyone worked on enabling options on the discontinued FSH3/6/18 series of R&S handheld spectrum analyzers like the K1 (RS-232), K2 Vector (Smith Chart) etc?

Thanks,

Sam

pressurefm · « **Reply #1 on:** March 27, 2018, 08:48:11 pm »

I have a serial number, and the activated option is K1, and the code consists of 10 digits
Can anyone make a key on them !?

pressurefm · « **Reply #2 on:** March 29, 2018, 06:15:04 pm »

stabista · « **Reply #3 on:** April 02, 2018, 10:55:58 am »

Serial number of mine FSH3 is 100561. Model number is 23 (023?). Needed option is K2 (2? i havent option number in hex). I tried to use methods from enabling options threads for other R&S equipment (crypto script for python and script for c (but for that last one i`m also havent hex representation for option codes), in first case got hex code, but need 10 digit.

scopeman · « **Reply #4 on:** April 03, 2018, 12:15:29 am »

pressurefm

Your IN box is full. I can not reply to any messages. Please clear your IN Box.

Thanks,

Sam

pressurefm · « **Reply #5 on:** April 13, 2018, 10:20:36 am »

My mail: pressurefm@mail.ru

pressurefm · « **Reply #6 on:** April 13, 2018, 10:28:18 am »

Option K1:

S/N - 104097

K1 - 0149876965

vk3st · « **Reply #7 on:** December 12, 2018, 08:27:19 am »

Hello,
I have both a FSH3 and a ZVH and would like to know if you can generate some codes for me?
The FSH is basic and will read my power module OK. It also has an operational preamp but not sure what other options I can activate.

The ZVH antenna and cable analyser once again is basic although if I understand correctly, in this model al the options are already installed and just need the activation code. Is this correct please?

My FSH is model 03 with serial 106705. Can you help me with activation of any extra modes on this one please?

I tried to assemble and run the keygen on this page but seem to be unable to make it work as the assembler always fails.
Particularly if you can help maybe with an executable copy of the key gen, that would help immensely.
Even further if you can assist with any extras on my ZVH such as activating the tracking generator would be magnificent.
Thank you for reading my letter, Ian
ian@ian-foster.com

eb4fbz · « **Reply #8 on:** December 12, 2018, 09:49:04 am »

Quote from: vk3st on December 12, 2018, 08:27:19 am

Hello,
I have both a FSH3 and a ZVH and would like to know if you can generate some codes for me?
The FSH is basic and will read my power module OK. It also has an operational preamp but not sure what other options I can activate.

The ZVH antenna and cable analyser once again is basic although if I understand correctly, in this model al the options are already installed and just need the activation code. Is this correct please?

My FSH is model 03 with serial 106705. Can you help me with activation of any extra modes on this one please?

I tried to assemble and run the keygen on this page but seem to be unable to make it work as the assembler always fails.
Particularly if you can help maybe with an executable copy of the key gen, that would help immensely.
Even further if you can assist with any extras on my ZVH such as activating the tracking generator would be magnificent.
Thank you for reading my letter, Ian
ian@ian-foster.com

sergeyklenov · « **Reply #9 on:** December 31, 2018, 10:22:11 am »

C0DeH1DeR · « **Reply #10 on:** December 31, 2018, 11:59:01 am »

Yes, i know who did it.

But i searching for algo for TSME/TSMW and other receivers. If any know, please contact me by pm.

Option key contains 30 digit and linked to serial.

zcjhit · « **Reply #11 on:** April 13, 2019, 02:49:37 pm »

Hello,

Could you share me who can enabling ZVH option,thanks

testpoint1 · « **Reply #12 on:** April 14, 2019, 02:20:12 am »

please be aware this is illegal, and it is unfair to Rohde & Schwarz.

carver · « **Reply #13 on:** July 05, 2019, 07:08:34 pm »

Quote from: laserK on March 01, 2019, 09:57:37 pm

Just found this thread. I did some reverse engineering on my ZVH4 two years ago.

please, check your PM.

PM could not be sent to 'laserK' as their inbox is full!

eb4fbz · « **Reply #14 on:** August 29, 2019, 03:08:19 pm »

Quote from: carver on July 05, 2019, 07:08:34 pm

Quote from: laserK on March 01, 2019, 09:57:37 pm
Just found this thread. I did some reverse engineering on my ZVH4 two years ago.
please, check your PM.

PM could not be sent to 'laserK' as their inbox is full!

This guy just PM me selling ZVH licenses.

CoolManF · « **Reply #15 on:** June 09, 2020, 12:11:36 am »

A little late to the game, but I just got my hands on an FSH6 and I'd like to figure out how to unlock K2 and K3 options. Anyone able to help me?

sergeyklenov · « **Reply #16 on:** June 09, 2020, 05:46:02 am »

PawelC · « **Reply #17 on:** March 01, 2021, 09:54:44 am »

Hi Guys,

Well it looks like i have similar case to but with R&S SFU Broadcast Test System. Machine is on the way now however i already know that there is no any extra options included. There is a few that i would like to unlock, especially about modulation etc.

Does anyone can help me somehow ? well i never tried to do it before but i read already thay you guys probably now how to do it for different machines

For any information, links i will be really gratefull.

Best Regards,
Pawel

Aposthemighty · « **Reply #18 on:** April 21, 2022, 05:57:47 pm »

Hello,

Aposthemighty · « **Reply #19 on:** April 21, 2022, 06:03:51 pm »

I'm late to this topic as-well. I have found myself with an FSH-3 that I'd like the unlock the K1 option on. I've called and talked with R&S but since its a discontinued product they will no longer support the product in any way. Any help would be awesome.

carver · « **Reply #20 on:** April 21, 2022, 06:21:32 pm »

Quote from: Aposthemighty on April 21, 2022, 06:03:51 pm

I'm late to this topic as-well. I have found myself with an FSH-3 that I'd like the unlock the K1 option on. I've called and talked with R&S but since its a discontinued product they will no longer support the product in any way. Any help would be awesome.

look carefully at the this topic, there was an medicine example, for discontinued units, in particular for FSH3.
If you can't figure it out, send me your SN in PM.

https://www.eevblog.com/forum/testgear/enabling-options-for-rs-test-equipment/


EEVblog Main Site	EEVblog on Youtube	EEVblog on Twitter	EEVblog on Facebook	EEVblog on Odysee

Author Topic: Enabling Options for Rohde & Schwarz FSH series (discontinued) analyzers (Read 8863 times)

Share me