FA-95 miniature drive belt for Wayne Kerr SR268 Source

[pamphonica]

I need a "PIC FA-95" miniature belt to complete the restoration of my Wayne Kerr SR268 Bridge source.

The belt in my SR268 has completely disintegrated, except for a small portion which amazingly has the belt type printed on it. It drives the switch for the many range lamps.

I can find the PIC Design website and the actual belt.  It's in their "No-Slip" series.  But they quote 96 days lead-time (apart from the extra $20 handling charge for a small order).
The belt is not a conventional ribbed one, but has pins sticking out sideways from a central core, a bit like a fishbone. The belt is 9.327" long and has 95 drive pins.
(See attachment for details)

A long shot but does anyone know where else I could get one of these belts, or something similar?

many thanks
Jeremy
(UK)

[Gregg]

Wm Berg makes this type of thing in the US. 
http://www.wmberg.com/products/belts-and-chains
It may get you started looking in a new direction

[pamphonica]

Good suggestion.  Only a shame that their minimum order is $500!
I’ll try more searches with their part number.
I see that these belts can actually be cut to length and joined on site so I could just look for a large belt and see if I can modify it.

[texaspyro]

Try Stock Drive Products...

[pamphonica]

Try Stock Drive Products...

A very good idea!  I checked and they seem to have what I want, at $15.10 a belt ($30 min order or $10 surcharge), so that little belt's going to be quite expensive by the time it finally gets to the UK.  I may try to see if a US friend can bring it over in August, to save a bit.
By the way, that's the belt with a steel core.  The original had an Aramid core and is out of stock.
thanks
Jeremy

[konczm123]

Hi,

Could you give me the exact part number? Have you tried your part bought from  Stock Drive Products?

Thanks and regards,

Miklos