EEVblog Electronics Community Forum

Products => Test Equipment => Topic started by: Dirac on January 03, 2017, 04:29:52 pm

Title: Fluke 45 calibration help
Post by: Dirac on January 03, 2017, 04:29:52 pm
Hello good day. I bought a Fluke 45 Multimeter, when I performed the ohm test, put the tips together and the ohm 2.76 ohm was off, then download the service manual to calibrate and perform the calibration and continue the same at 2.76 ohm. Please if someone can help me with the zero ohm setting. I leave the images there.
imagen 2.76 ohm
(https://s28.postimg.org/nokjmh91p/1_fluke_no_cero.jpg)
imagen de la calibracion 290ohm
(https://s29.postimg.org/vj1tk0dk7/2_fluke_290ohm.jpg)
(https://s29.postimg.org/dtn7dsk93/2_fluke_2_9kohm.jpg)
(https://s29.postimg.org/b7uxk6ptj/2_fluke_29kohm.jpg)
I would appreciate.
Title: Re: Fluke 45 calibration help
Post by: oois1 on July 28, 2017, 03:44:43 am
I got the same problem too.