Author Topic: PCB or panel to oscilloscope probe connector.  (Read 2373 times)

0 Members and 1 Guest are viewing this topic.

Offline harrimansatTopic starter

  • Regular Contributor
  • *
  • Posts: 210
PCB or panel to oscilloscope probe connector.
« on: July 21, 2017, 08:16:52 pm »
Hi, somebody knows where I can find a coaxial female for a oscilloscope probe like this, or something similar.



http://qservice.tv/vpasp/shopexd.asp?id=11793&bc=no

Thanks

Regards

Miguel
 

Offline cs.dk

  • Supporter
  • ****
  • Posts: 642
  • Country: dk
Re: PCB or panel to oscilloscope probe connector.
« Reply #1 on: July 21, 2017, 08:37:50 pm »
I would be very surprised if tme.eu doesn't have them.
 

Offline alm

  • Super Contributor
  • ***
  • Posts: 2840
  • Country: 00
Re: PCB or panel to oscilloscope probe connector.
« Reply #2 on: July 21, 2017, 09:31:51 pm »
Keep in mind that these are not standard parts. Each probe can be a slightly different size. Tektronix had multiple sizes (2.5mm, 3.5mm and 5mm) for different probes. But none of them would fit a HP/Agilent probe.

A universal but bulky alternative is to convert the probe tip to BNC, and use BNC panel or PCB connectors. Decent probes will either ship with probe tip to BNC adapters or will have them available as optional accessories.
 
The following users thanked this post: SiliconWizard


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf