List of oscilloscopes with Z axis

[PartialDischarge]

Please help me make a list of the Tektronix and HP oscilloscopes that have an analog Z input channel to modulate the image.

HP:
130A,C
140A,B
150A
175A
182C
1725
1740-1741

Tek:
453
464-465-466-468
475
485
2215-2225-2235-2236
2445
2465
2467
7104
7514
7613
7834
7844
7854
7904
7934
MSO5

Philips
PM3394
PM3384

Hameg 312-8
Kenwood CS4025/4125
Telequipment D83

[HighVoltage]

Not HP or TEK but my favorite scope with a Z-Axis:
Fluke PM3394B

[PartialDischarge]

Not HP or TEK but my favorite scope with a Z-Axis:
Fluke PM3394B

Fine, I said HP or Tek cause usually those have schematics published but that one is available too:

http://www.ko4bb.com/manuals/95.120.99.124/PM3384_service_manual.pdf

[macboy]

Tek 468, 2235, 2236

[Eric_S]

The new Tek 5-series:

[factory]

Are you just interested in listing solid state scopes with Z-axis inputs? As I have a few vintage boat anchor HP scopes here which all seem to have a Z-axis input (or intensity modulation), but not all can do X-Y mode if that is needed.

David

[PartialDischarge]

Yes David, with Z input is enough.  If they are hp better, they clearly lost the race in osc tubes to tektronix and there are not that many models out there

[factory]

Ok here's the list of what I have with Z input;

HP 130A, 130C
HP 140A, 140B
HP 150A
HP 175A

The two early ones (130A & 150A) use standard bought in tubes, the rest have HP tubes with the internal graticule, they didn't start making scopes till the mid to late 50's.

David

[PartialDischarge]

wow, those are really oldies I never heard of.

[barry14]

You can add the Tektronix 453 to the list.

[fenugrec]

Tek 2215, 2235

[wolfp]

Here my "Oldie" with Z-input:
Hameg 312-8

Imho I had to add the Z-Input myself

[stj]

Telequipment D83

when TEK took over Telequipment they re-released this scope under a different part number btw.

[tautech]

Telequipment D83

when TEK took over Telequipment they re-released this scope under a different part number btw.

Part # or model # ?

In the manual for the one I had it was a Telequipment D83 made by Telequipment, a division of Tektronix.

[stj]

no idea on part number, i'v simply noticed a few on ebay.
the screen module is slightly changed, but the plugin's look identical.

[rsjsouza]

Kenwood CS4025/4125
Schematica and service are available