Author Topic: Worth saving?  (Read 4559 times)

0 Members and 1 Guest are viewing this topic.

Offline xteveTopic starter

  • Newbie
  • Posts: 1
  • Country: pt
Worth saving?
« on: September 18, 2015, 11:11:56 pm »
Hello:

Where i work there are lots of things i think are treasures being thrown in the trash. Old tek stuff, like instruments and tek branded chips/components. I try to save the ones i think are noteworthy, but can't save everything.
Today i found this set of resistors, i measured them with a normal multimeter and they were fine, i'll read them with a proper >6 digits mm tomorrow or next week.
I have a weak spot for metrology, but this things are big!
Can they really be replaced by something modern? maybe use this as reference against some zfoil resistor, and keep that as reference? I'm also not very fond of putting them on the'bay.

Big question: are they worth saving? I need to buy them from my workplace at some random price or for about 1€ per kilo.

Best Regards
« Last Edit: May 17, 2019, 03:23:22 pm by xteve »
 

Online tautech

  • Super Contributor
  • ***
  • Posts: 28134
  • Country: nz
  • Taupaki Technologies Ltd. Siglent Distributor NZ.
    • Taupaki Technologies Ltd.
Re: 1956 Standard resistors worth saving?
« Reply #1 on: September 18, 2015, 11:22:31 pm »
Welcome to the forum.

Certainly yes, save them.

Manganin:
https://en.wikipedia.org/wiki/Manganin
Avid Rabid Hobbyist
Siglent Youtube channel: https://www.youtube.com/@SiglentVideo/videos
 

Offline ez24

  • Super Contributor
  • ***
  • Posts: 3082
  • Country: us
  • L.D.A.
Re: 1956 Standard resistors worth saving?
« Reply #2 on: September 18, 2015, 11:45:24 pm »
There is a For Sale section on this forum.   You could ask for asking prices there.
YouTube and Website Electronic Resources ------>  https://www.eevblog.com/forum/other-blog-specific/a/msg1341166/#msg1341166
 

Offline AF6LJ

  • Supporter
  • ****
  • Posts: 2902
  • Country: us
Re: 1956 Standard resistors worth saving?
« Reply #3 on: September 18, 2015, 11:47:05 pm »
Save them, sell them on the forum if you feel you need to.
Sue AF6LJ
 

Offline TiN

  • Super Contributor
  • ***
  • Posts: 4543
  • Country: ua
    • xDevs.com
Re: 1956 Standard resistors worth saving?
« Reply #4 on: September 18, 2015, 11:59:48 pm »
I would get them at no time :)
YouTube | Metrology IRC Chat room | Let's share T&M documentation? Upload! No upload limits for firmwares, photos, files.
 

Offline ez24

  • Super Contributor
  • ***
  • Posts: 3082
  • Country: us
  • L.D.A.
Re: 1956 Standard resistors worth saving?
« Reply #5 on: September 19, 2015, 12:03:48 am »
Start shopping for a new car
YouTube and Website Electronic Resources ------>  https://www.eevblog.com/forum/other-blog-specific/a/msg1341166/#msg1341166
 

Offline Fsck

  • Super Contributor
  • ***
  • Posts: 1157
  • Country: ca
  • sleep deprived
Re: 1956 Standard resistors worth saving?
« Reply #6 on: September 19, 2015, 12:03:56 am »
I would get them at no time :)

ditto.
"This is a one line proof...if we start sufficiently far to the left."
 

Offline Macbeth

  • Super Contributor
  • ***
  • Posts: 2571
  • Country: gb
Re: 1956 Standard resistors worth saving?
« Reply #7 on: September 19, 2015, 12:08:33 am »
I was just looking at reels of manganin in order to roll my own resistors.  :-+ Definitely worth saving.
 

Offline jwm_

  • Frequent Contributor
  • **
  • Posts: 319
  • Country: us
    • Not A Number
Re: 1956 Standard resistors worth saving?
« Reply #8 on: September 19, 2015, 12:13:49 am »
I just bought a similar one to one of those for a hundred bucks or so on ebay, because it looked cool and I was drunk. It's also how I ended up with a working VIC-20, a collection of old broken keithley meters, a rotary slide rule from russia (looks like a pocket watch, kind of neat.) and a cube of pure tungsten. (heavy.)

The moral, don't drink and ebay if you have a thing for vintage electronics.

Offline Fsck

  • Super Contributor
  • ***
  • Posts: 1157
  • Country: ca
  • sleep deprived
Re: 1956 Standard resistors worth saving?
« Reply #9 on: September 19, 2015, 12:15:19 am »
I just bought a similar one to one of those for a hundred bucks or so on ebay, because it looked cool and I was drunk. It's also how I ended up with a working VIC-20, a collection of old broken keithley meters, a rotary slide rule from russia (looks like a pocket watch, kind of neat.) and a cube of pure tungsten. (heavy.)

The moral, don't drink and ebay if you have a thing for vintage electronics.

the cube of pure tungsten seems kind of random in that selection
"This is a one line proof...if we start sufficiently far to the left."
 

Offline jwm_

  • Frequent Contributor
  • **
  • Posts: 319
  • Country: us
    • Not A Number
Re: 1956 Standard resistors worth saving?
« Reply #10 on: September 19, 2015, 12:22:57 am »
I just bought a similar one to one of those for a hundred bucks or so on ebay, because it looked cool and I was drunk. It's also how I ended up with a working VIC-20, a collection of old broken keithley meters, a rotary slide rule from russia (looks like a pocket watch, kind of neat.) and a cube of pure tungsten. (heavy.)

The moral, don't drink and ebay if you have a thing for vintage electronics.

the cube of pure tungsten seems kind of random in that selection

It's pretty neat, twice as dense as lead, fun to hand it to someone and watch them do a double take when they heft it. Also makes all those movies where people are robbing banks and tossing and carrying around gold bars look pretty implausible when you realize how heavy those bars would actually be. (gold and tungsten are about the same density, a bit more than uranium).

I just need to find an exact match made of magnesium (which looks identical in its metalic form but is incredibly light) to mess with people.

Online Vgkid

  • Super Contributor
  • ***
  • Posts: 2710
  • Country: us
Re: 1956 Standard resistors worth saving?
« Reply #11 on: September 19, 2015, 12:44:37 am »
At a 1€ a kg worth getting. Even if they are bad, they look cool.
If you own any North Hills Electronics gear, message me. L&N Fan
 

Offline retrolefty

  • Super Contributor
  • ***
  • Posts: 1648
  • Country: us
  • measurement changes behavior
Re: 1956 Standard resistors worth saving?
« Reply #12 on: September 19, 2015, 02:43:53 am »
I just bought a similar one to one of those for a hundred bucks or so on ebay, because it looked cool and I was drunk. It's also how I ended up with a working VIC-20, a collection of old broken keithley meters, a rotary slide rule from russia (looks like a pocket watch, kind of neat.) and a cube of pure tungsten. (heavy.)

The moral, don't drink and ebay if you have a thing for vintage electronics.

 We should start a new chapter of E-Bay-shopaholics and have the forum sponsor/host it.

Hi, I'm lefty and I am a E-bay-shopaholic. It's been 10 days sense my last buy-it-now episode.

 
 

Offline TiN

  • Super Contributor
  • ***
  • Posts: 4543
  • Country: ua
    • xDevs.com
Re: 1956 Standard resistors worth saving?
« Reply #13 on: September 19, 2015, 06:03:23 am »
No way, don't educate people around about good deals, or prices for good stuff will quickly skyrocket   :-/O. Camp your deals undercover  :blah:
YouTube | Metrology IRC Chat room | Let's share T&M documentation? Upload! No upload limits for firmwares, photos, files.
 

Offline SeanB

  • Super Contributor
  • ***
  • Posts: 16270
  • Country: za
Re: 1956 Standard resistors worth saving?
« Reply #14 on: September 19, 2015, 06:28:27 am »
Take the tungsten bar and coat with gold, then it will be a gold bar.
 

Offline pmcouto

  • Supporter
  • ****
  • Posts: 96
  • Country: pt
Re: 1956 Standard resistors worth saving?
« Reply #15 on: September 19, 2015, 10:57:38 am »
Xteve,

If I had the chance to buy those resistors for 1 Eur/Kg, I wouldn’t think twice…
The same with Tek instruments and components – Even if you don’t need them, you can always sell and make some money.  :)

Pedro Couto
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf