Author Topic: Rigol DM3058e how do you select the thermocouple type?  (Read 3628 times)

0 Members and 1 Guest are viewing this topic.

Offline BlueBillTopic starter

  • Regular Contributor
  • *
  • Posts: 169
  • Country: ca
Rigol DM3058e how do you select the thermocouple type?
« on: May 05, 2016, 03:00:35 am »
I've watched this DM3068 youtube review where around the 34 minute mark it shows different thermocouple types being selected. I can't seem to replicate this on my DM3058e.

 :-//
 

Offline cs.dk

  • Supporter
  • ****
  • Posts: 642
  • Country: dk
Re: Rigol DM3058e how do you select the thermocouple type?
« Reply #1 on: May 05, 2016, 07:19:29 am »
If you look at this side-by-side view of specs, and scrool down to temperature. The DM3058E does not seem to measure temperature;
http://www.tequipment.net/product-comparison/?Items=390476,397313
 

Offline Wytnucls

  • Super Contributor
  • ***
  • Posts: 3045
  • Country: be
Re: Rigol DM3058e how do you select the thermocouple type?
« Reply #2 on: May 05, 2016, 10:50:57 am »
It works for J,B,E,N,R,S and K-type TC, using the ITS90 reference tables. it also caters for PT100 and PT385 sensors.

Simple 4 button push for a K type TC:
Sensor - Load - File1 KITS90 - Read

http://srdata.nist.gov/its90/download/type_k.tab
« Last Edit: May 05, 2016, 11:03:09 am by Wytnucls »
 
The following users thanked this post: BlueBill, paulbt, pdx_soft, ulaktron


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf