Author Topic: Rigol DP832 - Firmware list and bugs  (Read 309422 times)

0 Members and 3 Guests are viewing this topic.

Offline f1rmb

  • Regular Contributor
  • *
  • Posts: 180
  • Country: fr
Re: Rigol DP832 - Firmware list and bugs
« Reply #150 on: September 24, 2014, 11:09:50 am »
Hi,


Could you give us a bit more informations?

Cheers.
---
Daniel.


Digital version  :00.01.09.00.01
Analog Version :00:00:00:00:00:00
boot Version    :01.06
Keyboard Version :01.01

Analog version is full of zeros. Depending of where you're living, I can't suggest you to open the box and check the connections as a first step.

Cheers.
---
Daniel
 

Offline frahul

  • Contributor
  • Posts: 11
  • Country: in
Re: Rigol DP832 - Firmware list and bugs
« Reply #151 on: September 24, 2014, 11:31:03 am »
Should I try upgrading the firmware first ?
 

Offline f1rmb

  • Regular Contributor
  • *
  • Posts: 180
  • Country: fr
Re: Rigol DP832 - Firmware list and bugs
« Reply #152 on: September 24, 2014, 11:35:44 am »
Should I try upgrading the firmware first ?

I don't think so, but the analog boards, yes.

Cheers.
---
Daniel
 

Offline frahul

  • Contributor
  • Posts: 11
  • Country: in
Re: Rigol DP832 - Firmware list and bugs
« Reply #153 on: September 24, 2014, 12:03:58 pm »
It does not detect the USB stick. Do you have any pictures which connection I sould be looking for
 

Offline f1rmb

  • Regular Contributor
  • *
  • Posts: 180
  • Country: fr
Re: Rigol DP832 - Firmware list and bugs
« Reply #154 on: September 24, 2014, 12:54:44 pm »
It does not detect the USB stick. Do you have any pictures which connection I sould be looking for

You don't need anything for updating analog boards.

First, press "Help, Help, M4, M2, M1" to update the board1.
Then, press this sequence twice: "M4, M2, M2" to update the board2.

But I'm far from sure that will fix your problem.

Cheers.
---
Daniel.
 

Offline frahul

  • Contributor
  • Posts: 11
  • Country: in
Re: Rigol DP832 - Firmware list and bugs
« Reply #155 on: September 24, 2014, 01:51:59 pm »

You don't need anything for updating analog boards.

First, press "Help, Help, M4, M2, M1" to update the board1.
Then, press this sequence twice: "M4, M2, M2" to update the board2.

But I'm far from sure that will fix your problem.

Cheers.
---
Daniel.

Its Fixed. I was just a loose ribbon cable between the analog board and the digital display board.

Thanks for your help Daniel
 

Offline f1rmb

  • Regular Contributor
  • *
  • Posts: 180
  • Country: fr
Re: Rigol DP832 - Firmware list and bugs
« Reply #156 on: September 24, 2014, 01:55:32 pm »

You don't need anything for updating analog boards.

First, press "Help, Help, M4, M2, M1" to update the board1.
Then, press this sequence twice: "M4, M2, M2" to update the board2.

But I'm far from sure that will fix your problem.

Cheers.
---
Daniel.

Its Fixed. I was just a loose ribbon cable between the analog board and the digital display board.

Thanks for your help Daniel

Nice to read that you fixed the problem :-)

Cheers.
---
Daniel.
 

Offline Jekin

  • Newbie
  • Posts: 7
  • Country: by
Re: Rigol DP832 - Firmware list and bugs
« Reply #157 on: September 25, 2014, 08:54:07 am »
Hi to all,

Maybe someone has firmware rev. 1.10? Don't want to upgrade to 1.11.

Thanks
 

Offline Macbeth

  • Super Contributor
  • ***
  • Posts: 2571
  • Country: gb
Re: Rigol DP832 - Firmware list and bugs
« Reply #158 on: September 25, 2014, 07:16:34 pm »
Why not upgrade to 1.11? It works fine for me.
 

Offline Jekin

  • Newbie
  • Posts: 7
  • Country: by
Re: Rigol DP832 - Firmware list and bugs
« Reply #159 on: September 25, 2014, 07:21:49 pm »
Because of this bug:

https://www.eevblog.com/forum/testgear/rigol-dp832-firmware-updates-and-bug-list/msg508032/#msg508032

Well, I'm new to the subj. Maybe the manual calibration isn't so important...
 

Offline Macbeth

  • Super Contributor
  • ***
  • Posts: 2571
  • Country: gb
Re: Rigol DP832 - Firmware list and bugs
« Reply #160 on: September 25, 2014, 07:47:37 pm »
Oh right - I wouldn't dare try and calibrate it anyway - it comes factory calibrated. If it 'aint broke don't fix it!

Maybe in a year or two...
 

Offline radiogeek97

  • Regular Contributor
  • *
  • Posts: 95
  • Country: us
Re: Rigol DP832 - Firmware list and bugs
« Reply #161 on: October 09, 2014, 05:58:06 pm »
DEAR GROUP
    just unboxed my dp832 it has firmware version 1.10  i tryied using the rigol keygen and it says invalid serial number.  Has any body else have this problem.  i tryied typing in the generated key several times and used the hi res option and the analiser monitor option.  is this version FW locked?  do i need to downgrade?   any advise or further information I can give you folks please chime in.  I will do more research tonight from work    thanks in advance
 

Offline Jekin

  • Newbie
  • Posts: 7
  • Country: by
Re: Rigol DP832 - Firmware list and bugs
« Reply #162 on: October 09, 2014, 06:03:19 pm »
DEAR GROUP
    just unboxed my dp832 it has firmware version 1.10  i tryied using the rigol keygen and it says invalid serial number.  Has any body else have this problem.  i tryied typing in the generated key several times and used the hi res option and the analiser monitor option.  is this version FW locked?  do i need to downgrade?   any advise or further information I can give you folks please chime in.  I will do more research tonight from work    thanks in advance

Have you tried options with first letter "F" in keygen? You should use new device options starting from v1.09:

http://riglol.3owl.com/

My firmware version was 1.09 and I successfully activated the Hi-Res.
 

Offline radiogeek97

  • Regular Contributor
  • *
  • Posts: 95
  • Country: us
Re: Rigol DP832 - Firmware list and bugs
« Reply #163 on: October 09, 2014, 06:20:04 pm »
yes used the same link you psted tryied the versions as you suggested starting with F |O

do u think i may have to try to downgrade the FW?  How would one go about that on the dp832?    Hopefully the bootloader will support that :(
 
The following users thanked this post: serguletti

Offline Jekin

  • Newbie
  • Posts: 7
  • Country: by
Re: Rigol DP832 - Firmware list and bugs
« Reply #164 on: October 09, 2014, 06:34:26 pm »
yes used the same link you psted tryied the versions as you suggested starting with F |O

do u think i may have to try to downgrade the FW?  How would one go about that on the dp832?    Hopefully the bootloader will support that :(
How many digits in the code which you are trying to type?
 

Offline f1rmb

  • Regular Contributor
  • *
  • Posts: 180
  • Country: fr
Re: Rigol DP832 - Firmware list and bugs
« Reply #165 on: October 09, 2014, 07:11:46 pm »
Hi,
DEAR GROUP
    just unboxed my dp832 it has firmware version 1.10  i tryied using the rigol keygen and it says invalid serial number.  Has any body else have this problem.  i tryied typing in the generated key several times and used the hi res option and the analiser monitor option.  is this version FW locked?  do i need to downgrade?   any advise or further information I can give you folks please chime in.  I will do more research tonight from work    thanks in advance

I've unlocked my DP832, running the same FW, without any troubles (using the Fxxx option codes).
Are you sure about your serial number ?

Cheers.
---
Daniel.
 

Offline f1rmb

  • Regular Contributor
  • *
  • Posts: 180
  • Country: fr
Re: Rigol DP832 - Firmware list and bugs
« Reply #166 on: October 09, 2014, 07:13:06 pm »
Hi,

yes used the same link you psted tryied the versions as you suggested starting with F |O

do u think i may have to try to downgrade the FW?  How would one go about that on the dp832?    Hopefully the bootloader will support that :(

You cannot downgrade from FW > 1.09

Cheers.
---
Daniel
 

Offline ulrik

  • Newbie
  • Posts: 5
  • Country: at
Re: Rigol DP832 - Firmware list and bugs
« Reply #167 on: October 09, 2014, 09:15:22 pm »
    just unboxed my dp832 it has firmware version 1.10  i tryied using the rigol keygen and it says invalid serial number.  Has any body else have this problem.  i tryied typing in the generated key several times and used the hi res option and the analiser monitor option.  is this version FW locked?  do i need to downgrade?   any advise or further information I can give you folks please chime in.  I will do more research tonight from work    thanks in advance

I have 1.10 also -  and it worked - ensure using correct Riglol - this worked for me: http://riglol.3owl.com/ - get version data  by pressing <Utility> - <SysInfo> - <M1> - <M3> - <M2> - don't use privatekey in riglol
---
all circuits lead to ROM
 

Offline haveissues

  • Contributor
  • Posts: 39
  • Country: us
Re: Rigol DP832 - Firmware list and bugs
« Reply #168 on: October 09, 2014, 09:55:31 pm »
I also have 1.10 and was able to unlock it a couple of weeks ago.
 

Offline radiogeek97

  • Regular Contributor
  • *
  • Posts: 95
  • Country: us
Re: Rigol DP832 - Firmware list and bugs
« Reply #169 on: October 09, 2014, 11:28:25 pm »
Ulrik
   I used the default private key in the key gen software  :palm:  I didn't know   I will try the series of keys you suggested. After I press the series of keys you outlined will that give me a different private key?

Thanks
 

Offline Jekin

  • Newbie
  • Posts: 7
  • Country: by
Re: Rigol DP832 - Firmware list and bugs
« Reply #170 on: October 10, 2014, 06:49:04 am »
You should use 28 symbols-key (from pop-up window at riglol). Seems you use Privatekey.
 

Offline radiogeek97

  • Regular Contributor
  • *
  • Posts: 95
  • Country: us
Re: Rigol DP832 - Firmware list and bugs
« Reply #171 on: October 10, 2014, 07:30:15 am »
So when Ulrik made refrence to the version data and pressing sysinfo m1 m3 m2 what do I do with the information there? When I enter the machines serial # and the options I want the private key is automatically filled in.   Then I click generate and it generates a very long alphanumeric string. I type that into the dp832 and it gives me an error.     Am I using the key generator correctly or do I use a different private key then click generate?    I'm just a bit confused.      Sorry
 

Offline Jekin

  • Newbie
  • Posts: 7
  • Country: by
Re: Rigol DP832 - Firmware list and bugs
« Reply #172 on: October 10, 2014, 07:36:11 am »
Fill "serial", "options" and click "generate". Type 28-symbols key at the rigol's option->install window. That's all.

<Utility> - <SysInfo> - <M1> - <M3> - <M2> just shows the full system information (bootlader version, etc), I don't know why you need it.
 

Offline radiogeek97

  • Regular Contributor
  • *
  • Posts: 95
  • Country: us
Re: Rigol DP832 - Firmware list and bugs
« Reply #173 on: October 10, 2014, 02:35:05 pm »
I tryied several times with no luck  :wtf:  then I backed out of the keygen program re entered the serial (same as before) generated a new key triple checked (same as before) hit ok expecting "invalid serial #".  And POOF "official version installed".   :clap:    I know everything was entered correctly both times maybee regenerating a new key did it.     I have a sense of accomplishment even though all I did is enter data.  HUGE thanks to all the truely smart helpful folks here that make the real magic happen.    THANK YOU ALL. 
 

Offline radiogeek97

  • Regular Contributor
  • *
  • Posts: 95
  • Country: us
Re: Rigol DP832 - Firmware list and bugs
« Reply #174 on: October 10, 2014, 02:37:50 pm »
Attached is the version information of this machine that is to be known as working with the key generator.   
Thanks again
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf