Low Cost PCB's Low Cost Components

Author Topic: Rigol DS1054Z, DS1074Z or DS1104Z to bump up to 100MHz  (Read 2716 times)

0 Members and 1 Guest are viewing this topic.

Offline 366Cobra

  • Newbie
  • Posts: 3
Rigol DS1054Z, DS1074Z or DS1104Z to bump up to 100MHz
« on: December 08, 2014, 09:03:23 AM »
Hi All,

I am wanting to buy a Rigol 4 channel scope - am a hobbyist.
Have been reading a lot about Rigol DS1054Z, DS1074Z and DS1104Z and bumping the first two up to 100MHz.
What I have not been able to find is, if the hardware in all of them is the same and that the software selects the MHz.

Since budget is an issue, can I get a DS1054Z and bump it up to a DS1104Z?
Or would it make more sense to get a DS1074Z and bump it up to a DS1104Z

At the moment I do not need 100MHz, but I like things to be future proof.

Any input is appreciated.

Thanks
Martin
 

Online hammy

  • Supporter
  • ****
  • Posts: 374
  • Country: de
Re: Rigol DS1054Z, DS1074Z or DS1104Z to bump up to 100MHz
« Reply #1 on: December 08, 2014, 09:34:32 AM »
Hi Martin.

Unfortunately you are asking some questions who are already discussed over and over again. ,-)
Please use the search function and have a look ...

The short answer is: Yes, it is the same hardware. Yes, it is possible. Yes, it is your own decision.
 

Offline 366Cobra

  • Newbie
  • Posts: 3
Re: Rigol DS1054Z, DS1074Z or DS1104Z to bump up to 100MHz
« Reply #2 on: December 09, 2014, 10:07:14 AM »
thanks for the answer, that made it easy.
Sorry, but I was searching Google and in here for two days and could not find your answer.

@hammy
Besten Dank
 

Online hammy

  • Supporter
  • ****
  • Posts: 374
  • Country: de
Re: Rigol DS1054Z, DS1074Z or DS1104Z to bump up to 100MHz
« Reply #3 on: December 11, 2014, 11:18:28 PM »
@hammy
Besten Dank

Kein Problem. Viel SpaƟ mit dem Oszi!  ;)
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf