EEVblog Electronics Community Forum

Products => Test Equipment => Topic started by: Oldguy on July 28, 2017, 05:10:43 am

Title: Rigol DS1140Z Plus and rigup for Windows
Post by: Oldguy on July 28, 2017, 05:10:43 am

I have missed something and it's probably staring me in the face, but I haven’t found it.
Is there a way to use rigup from a windows platform for the 1104z?
I have run “rigup-0.4.2-x86_64-win” and it turned out to be for the 2000 series scopes. I am looking for a rigup for Windows, for the 1104z Plus. I do not have a Linux/FreeBSD... and I really don't want to go down that path. I have the .bin file from the JTAG port (Note the JTAG header was not populated)

Any help would be appreciated. Thanks

Title: Re: Rigol DS1140Z Plus and rigup for Windows
Post by: Edinson on July 28, 2017, 05:30:26 pm

I used this version http://i-hobby.org/blog/Electronics/60.html (http://i-hobby.org/blog/Electronics/60.html)

I found it in reply #4091:  https://www.eevblog.com/forum/testgear/sniffing-the-rigol's-internal-i2c-bus/4075/ (https://www.eevblog.com/forum/testgear/sniffing-the-rigol's-internal-i2c-bus/4075/)

For me it worked without problems.

Title: Re: Rigol DS1140Z Plus and rigup for Windows
Post by: Oldguy on July 29, 2017, 07:16:11 am

Thank you, SUCCESS! ;D
The first link (http://i-hobby.org/blog/Electronics/60.html (http://i-hobby.org/blog/Electronics/60.html)) is for the correct download of the rigup.zip (for windows).

I would not have been successful without those that came before me.
So a big thank you.