Low Cost PCB's Low Cost Components

Author Topic: Rigol DS2072A Print to USB Problem  (Read 243 times)

0 Members and 1 Guest are viewing this topic.

Offline iBeta

  • Contributor
  • Posts: 7
Rigol DS2072A Print to USB Problem
« on: March 02, 2017, 11:54:27 PM »
Around 50% of the time, using any method to print the waveform fails. It looks like it has worked, however the image file shows a blank scope screen, with no signals present.
This is a bit annoying, because it is difficult to know if the print worked before connecting the usb stick to a pc.
Rigol are aware of this, however the latest fw I've got (00.03.05) still has the error.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf