Author Topic: Rigol MSO1104Z firmware upgrade keeps options?  (Read 457 times)

0 Members and 1 Guest are viewing this topic.

Offline jrmymllr

  • Contributor
  • Posts: 15
  • Country: us
Rigol MSO1104Z firmware upgrade keeps options?
« on: June 30, 2017, 02:05:07 AM »
I've found lots of posts regarding this series of scope (and DS1000 series), but couldn't find anything regarding whether options obtained by using JTAG and rigup were maintained after reflashing.  My guess is they are maintained since the lack of complaints might mean everything is ok.

So, is it safe to apply DS1000Z Firmware_00.04.04.03.02 from http://int.rigol.com/Support/SoftDownload/3, will option codes not obtained from Rigol stay intact?
 

Offline Fungus

  • Super Contributor
  • ***
  • Posts: 6995
Re: Rigol MSO1104Z firmware upgrade keeps options?
« Reply #1 on: June 30, 2017, 02:54:40 AM »
I've found lots of posts regarding this series of scope (and DS1000 series), but couldn't find anything regarding whether options obtained by using JTAG and rigup were maintained after reflashing.  My guess is they are maintained since the lack of complaints might mean everything is ok.

So, is it safe to apply DS1000Z Firmware_00.04.04.03.02 from http://int.rigol.com/Support/SoftDownload/3, will option codes not obtained from Rigol stay intact?

It's certainly true on the DS1054Z, the MSO should be no different (it's the same firmware!).

 
The following users thanked this post: jrmymllr


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf