EEVblog Electronics Community Forum
Products => Test Equipment => Topic started by: jrmymllr on June 29, 2017, 04:05:07 pm
-
I've found lots of posts regarding this series of scope (and DS1000 series), but couldn't find anything regarding whether options obtained by using JTAG and rigup were maintained after reflashing. My guess is they are maintained since the lack of complaints might mean everything is ok.
So, is it safe to apply DS1000Z Firmware_00.04.04.03.02 from http://int.rigol.com/Support/SoftDownload/3 (http://int.rigol.com/Support/SoftDownload/3), will option codes not obtained from Rigol stay intact?
-
I've found lots of posts regarding this series of scope (and DS1000 series), but couldn't find anything regarding whether options obtained by using JTAG and rigup were maintained after reflashing. My guess is they are maintained since the lack of complaints might mean everything is ok.
So, is it safe to apply DS1000Z Firmware_00.04.04.03.02 from http://int.rigol.com/Support/SoftDownload/3 (http://int.rigol.com/Support/SoftDownload/3), will option codes not obtained from Rigol stay intact?
It's certainly true on the DS1054Z, the MSO should be no different (it's the same firmware!).