« previous next »
Pages: [1]   Go Down

Author Topic: TDS380 Screen Capture/GPIB  (Read 1347 times)

0 Members and 1 Guest are viewing this topic.

Offline daveykTopic starter

  • Frequent Contributor
  • **
  • Posts: 413
  • Country: us
TDS380 Screen Capture/GPIB
« on: May 24, 2017, 03:28:20 am »
Wavestar 3.0 does not appear to support the TDS380.  Older versions may have but I could barely find the last version 3.0.

OpenChoice Desktop which I use with my TDS3032 does not support the TDS380.

Does anyone have screen shot software for the TDS380 or an older version of Wavestar that would support it?

As far as controlling the instrument, the command set looks very close to the TDS3000 series. Little changes may be needed.

Dave
Logged
 

Offline KE5FX

  • Super Contributor
  • ***
  • Posts: 1890
  • Country: us
    • KE5FX.COM
Re: TDS380 Screen Capture/GPIB
« Reply #1 on: May 24, 2017, 04:42:12 am »
See my reply to rx8pilot here.  I don't know if my quick-and-dirty freeware app can grab a plot from a TDS300-series -- my guess is not -- but the other program I mentioned (PrintCapture) probably can.  Only drawback is it's not free.
Logged
 
The following users thanked this post: jundar
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee