Author Topic: Unlocking DS1074Z S-PLUS  (Read 4503 times)

0 Members and 1 Guest are viewing this topic.

Offline zanzeoo

  • Contributor
  • Posts: 12
  • Country: fr
Unlocking DS1074Z S-PLUS
« on: January 08, 2016, 04:56:50 PM »
Hi every ! I've just bougnt the new RIGOL DS1074Z S PLUS , I tried the unlock keygen tool but none keys seem to work

Software version is 00.04.03.SP1
Board 6.1.1

Does anyone can help me ?


thx !

« Last Edit: January 08, 2016, 05:32:47 PM by zanzeoo »
 

Online TheSteve

  • Supporter
  • ****
  • Posts: 2158
  • Country: ca
  • GHz or bust
Re: Unlocking DS1074Z S-PLUS
« Reply #1 on: January 08, 2016, 05:38:12 PM »
I highly doubt the new Plus models are supported by any key gen(but hope I am wrong).
VE7FM
 

Offline zanzeoo

  • Contributor
  • Posts: 12
  • Country: fr
Re: Unlocking DS1074Z S-PLUS
« Reply #2 on: January 09, 2016, 07:06:50 PM »
me too ....
 

Offline Howardlong

  • Super Contributor
  • ***
  • Posts: 3889
  • Country: gb
Re: Unlocking DS1074Z S-PLUS
« Reply #3 on: January 09, 2016, 07:33:11 PM »
Are these not MSO upgradeable? In which case, maybe the MSO1000Z procedure is needed.
 

Online TheSteve

  • Supporter
  • ****
  • Posts: 2158
  • Country: ca
  • GHz or bust
Re: Unlocking DS1074Z S-PLUS
« Reply #4 on: January 09, 2016, 07:50:45 PM »
Are these not MSO upgradeable? In which case, maybe the MSO1000Z procedure is needed.

I think you might be on to something.

zanzeoo check out this thread:
http://www.eevblog.com/forum/testgear/sniffing-the-rigol's-internal-i2c-bus/msg569236/#msg569236
VE7FM
 

Offline Spiral

  • Newbie
  • Posts: 2
  • Country: us
Re: Unlocking DS1074Z S-PLUS
« Reply #5 on: February 21, 2016, 03:59:40 AM »
Any luck with this one?
 

Offline Spiral

  • Newbie
  • Posts: 2
  • Country: us
Re: Unlocking DS1074Z S-PLUS
« Reply #6 on: February 23, 2016, 04:44:54 AM »
Are these not MSO upgradeable? In which case, maybe the MSO1000Z procedure is needed.

I think you might be on to something.

zanzeoo check out this thread:
http://www.eevblog.com/forum/testgear/sniffing-the-rigol's-internal-i2c-bus/msg569236/#msg569236

I completed the procedure outlined in that thread on my DS1074Z-S Plus and can confirm it works.

 

Offline Gioreva

  • Contributor
  • Posts: 7
Re: Unlocking DS1074Z S-PLUS
« Reply #7 on: March 09, 2017, 11:39:45 PM »
Logic probe are passive wire?
Can I make it myself an unlock logic analyzer?
 

Offline Howardlong

  • Super Contributor
  • ***
  • Posts: 3889
  • Country: gb
Re: Unlocking DS1074Z S-PLUS
« Reply #8 on: March 10, 2017, 04:20:21 AM »
 

Offline Gioreva

  • Contributor
  • Posts: 7
Re: Unlocking DS1074Z S-PLUS
« Reply #9 on: March 10, 2017, 10:48:31 PM »
Ok
But without the logic probe, does it work?
Connecting the wires to the connector directly?
Those comparators increase the efficiency, but for most applications, slower, could fit the same.
It 'a commercially available connector?
 

Offline Howardlong

  • Super Contributor
  • ***
  • Posts: 3889
  • Country: gb
Re: Unlocking DS1074Z S-PLUS
« Reply #10 on: March 11, 2017, 02:45:41 AM »
Ok
But without the logic probe, does it work?
Connecting the wires to the connector directly?
Those comparators increase the efficiency, but for most applications, slower, could fit the same.
It 'a commercially available connector?

It's a high density connector, without measuring it I'd say 0.05" pitch. This is because the signals between the pod comparators and the scope are differential, so you'd need to deal with that aspect as well as any amplitude and CM adjustment.

I am sure you could cobble something together, whether you'd want to though is another matter!
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf