EEVblog Electronics Community Forum

Products => Test Equipment => Topic started by: coromonadalix on April 03, 2015, 07:02:00 pm

Title: xx 1061 branded lcz meter
Post by: coromonadalix on April 03, 2015, 07:02:00 pm

hello   
I have won on ebay an zentech 1061 lcz meter,  it is sold under many brand ...    i am trying to find an user manual for it, with no luck.

I whant to know if i can calibrate my kelvin probes, i have a few milli ohms of impedance (0.9 ohms)  i whant to remove from measurements if possible, and i suspect my probe to be slightly defective, the wires are beginning to crack on the shielding,  damaged and pinched  on a few places

Sended a few Emails to the companies still no luck ??  has any one played with thoses  meters ?

thks guys

Title: Re: xx 1061 branded lcz meter
Post by: commongrounder on April 03, 2015, 07:31:30 pm

Have you zeroed your test leads with the open and short cal buttons? That will remove the lead resistance, inductance and capacitance from your test results. :)

Title: Re: xx 1061 branded lcz meter
Post by: coromonadalix on April 04, 2015, 02:53:08 am

tried   but i dont know how to do it properly, i see open  and short on the display, but after that  i dont know how to calibrate it

i will try on ebay an seller who sell them,  if he whant to ship me a copy of the user manual.