Posted by: tomas123
Edit field F29 of the Excel sheet for display another wave lenghts.
That is not what I meant. I am suggesting copying the sheet 6 times, set each sheet to the different wavelengths and then sum the radiance result from all the sheets with appropriate transmission / sensitivity factors on a new master sheet.
R (total) = a*R(T)(7500) + b*R(T)(8500) + c*R(T)(9500) + d*R(T)(10500) + e*R(T)(11500) + f*R(T)(12500) + g*R(T)(13500)
where:
R(T)(7500) is the radiance of a black body at temperature T for 7500nm, and assumed representative of the radiance from 7000 to 8000 nm.
a - g are the optic transmissions / sensor absorptions for each 1000nm block
I assume zero transmission below 7000 and above 14000
Bill