« previous next »
Pages: [1]   Go Down

Author Topic: FLIR MR160 Thermal Imaging & Moisture Meter Review, Teardown & Experiments  (Read 2521 times)

0 Members and 1 Guest are viewing this topic.

Offline HugoneusTopic starter

  • Frequent Contributor
  • **
  • Posts: 956
  • Country: us
    • The Signal Path Video Blog
FLIR MR160 Thermal Imaging & Moisture Meter Review, Teardown & Experiments
« on: January 10, 2016, 05:33:19 pm »
You can watch the video here: [28 Minutes]
youtu.be/CLIaCu2opcc

More videos at The Signal Path:
http://www.TheSignalPath.com
Logged
 

Offline Len

  • Frequent Contributor
  • **
  • Posts: 547
  • Country: ca
Re: FLIR MR160 Thermal Imaging & Moisture Meter Review, Teardown & Experiments
« Reply #1 on: January 10, 2016, 07:30:06 pm »
I was expecting you to measure the moisture content of Poochie.
Logged
DIY Eurorack Synth: https://lenp.net/synth/
 

Offline frenky

  • Supporter
  • ****
  • Posts: 1003
  • Country: si
    • Frenki.net
Re: FLIR MR160 Thermal Imaging & Moisture Meter Review, Teardown & Experiments
« Reply #2 on: January 12, 2016, 02:43:06 pm »
How come that you bought MR160 with 80x60 resolution for 600$ instead of Flir One V2 with 160x120 sensor for 250$?

Is is because MR160 would be more interesting in a teardown video?

P.S:
I really like your educational videos. Especially when you are fixing some hardware; it's like watching a detective at work. :-+
« Last Edit: January 12, 2016, 02:44:50 pm by frenky »
Logged
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee