Author Topic: FLIR One Gen2 failure investigation + FULL RESET method by Fraser  (Read 3272 times)

0 Members and 2 Guests are viewing this topic.

Offline McDoS

  • Contributor
  • Posts: 11
  • Country: ru
Re: FLIR One Gen2 failure investigation + FULL RESET method by Fraser
« Reply #50 on: April 20, 2017, 08:21:11 PM »
Fraser, you have a lot of FlirOne devices. Can you do one experiment for me with one of your correctly working device? I'm very interested to know some one: if disconnect all modules from PCB does it starts to charge if connect USB charger (battery must be connected). Does the green led near USB lights up?
 

Offline marlendive

  • Contributor
  • Posts: 5
  • Country: it
Re: FLIR One Gen2 failure investigation + FULL RESET method by Fraser
« Reply #51 on: April 21, 2017, 12:45:36 AM »
Yesterday a strange thing happened: I was trying to connect my F1G2 to the PC using a USB-microUSB adapter.
Nothing happened, but suddenly the small green light near the USB charging plug started flashing.
The orange led became green, too.
I tried to connect it to the smartphone and it was recognized by the Flir App, I checked in the setting menu and the firmware resulted up to date.
After few seconds, the led turned into orange again and it was not possible to use the camera, just pushing the power button, the green light turns on again, but it lasts very few seconds.
 

Online Fraser

  • Super Contributor
  • ***
  • Posts: 5530
  • Country: gb
Re: FLIR One Gen2 failure investigation + FULL RESET method by Fraser
« Reply #52 on: April 21, 2017, 08:08:03 AM »
@McDoS

I do not have any FLIR One units disassembled at the moment and I am currently dealing with the death of a loved one so not doing any work on cameras for a while. Sorry.

Regards

Fraser
 

Offline bitseeker

  • Super Contributor
  • ***
  • Posts: 2607
  • Country: us
  • Lots of engineer-tweakable parts inside!
Re: FLIR One Gen2 failure investigation + FULL RESET method by Fraser
« Reply #53 on: April 21, 2017, 02:18:22 PM »
Sorry to hear, Fraser. Condolences.
Got GAS? Get relief at Test Equipment Anonymous. It's a TEA party.
 

Offline McDoS

  • Contributor
  • Posts: 11
  • Country: ru
Re: FLIR One Gen2 failure investigation + FULL RESET method by Fraser
« Reply #54 on: April 21, 2017, 08:49:49 PM »
So sad... Condolences.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf