Author Topic: Software and Information CD for Argus 2 & 3  (Read 2506 times)

0 Members and 1 Guest are viewing this topic.

Offline Bill WTopic starter

  • Super Contributor
  • ***
  • Posts: 1102
  • Country: gb
    • Fire TICS
Software and Information CD for Argus 2 & 3
« on: January 27, 2017, 12:28:14 am »
I have uploaded copies of the Argus 2 and Argus 3 CD's as supplied with the cameras to the fire-tics website for browsing and download.

The CD have:
  • Datasheets for cameras and accessories
    User manuals
    Sample video and descriptions
    Customer control software. 

The software is pretty limited functions like change time / date and display C or F.  The Argus 3 software also allows image download and colouring.
In both cases I have altered the 'Install' to be 'download zip'.

http://www.fire-tics.co.uk/Argus2_CD/index.htm

http://www.fire-tics.co.uk/Argus3_CD/index.htm

To connect to the camera you need a special cable for the Fischer connector on the camera to RS232.  These were also supplied with the cameras.

Bill
 
The following users thanked this post: Ultrapurple

Offline nitroluver

  • Newbie
  • Posts: 2
  • Country: us
Re: Software and Information CD for Argus 2 & 3
« Reply #1 on: January 11, 2018, 08:08:40 pm »
Do you where I can get a cable?
 

Offline Bill WTopic starter

  • Super Contributor
  • ***
  • Posts: 1102
  • Country: gb
    • Fire TICS
Re: Software and Information CD for Argus 2 & 3
« Reply #2 on: January 12, 2018, 12:39:51 am »
I'm afraid it is a case of make your own.  The Fischer connectors are expensive, but the rest is easy with 3 wires and a 9 pin D.
You'd need a SE102A054 or similar (5 pin 102 series).

Failing that you could replace the socket with something else.

Pinout below

regards
Bill


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf