Author Topic: Thermal Imaging Gallery  (Read 115043 times)

0 Members and 1 Guest are viewing this topic.

Offline frenkyTopic starter

  • Supporter
  • ****
  • Posts: 1003
  • Country: si
    • Frenki.net
Re: Thermal Imaging Gallery
« Reply #25 on: August 22, 2016, 07:55:54 pm »
Subject: USB led
Camera: ThermalExpert Q1
Lens: 13mm f/1.0
Camera mods: additional ZnSe 50mm lens







« Last Edit: August 22, 2016, 08:08:50 pm by frenky »
 
The following users thanked this post: jonovid

Offline jeffreythe00

  • Newbie
  • Posts: 9
Re: Thermal Imaging Gallery
« Reply #26 on: August 23, 2016, 09:21:44 pm »
Subject: Tombstone
Camera: Therm-App
Lens: 19mm f/1.0
Image manipulation: none
Camera mods: None

http://
 

Offline Kilrah

  • Supporter
  • ****
  • Posts: 1852
  • Country: ch
Re: Thermal Imaging Gallery
« Reply #27 on: August 23, 2016, 09:24:38 pm »
Theater rehearsal...

ThermalExpert TE-Q1+, 19mm F1

 
The following users thanked this post: jonovid

Offline Bud

  • Super Contributor
  • ***
  • Posts: 6877
  • Country: ca
Re: Thermal Imaging Gallery
« Reply #28 on: August 29, 2016, 03:35:26 am »
Camera: Flir E4 (doctored)
Subject: Cat


Subject: JBC soldering iron handpiece


Subject: FT1000MP MarkV amateur transceiver


« Last Edit: August 29, 2016, 03:37:56 am by Bud »
Facebook-free life and Rigol-free shack.
 
The following users thanked this post: jonovid

Offline eternalone

  • Contributor
  • Posts: 30
  • Country: us
Re: Thermal Imaging Gallery
« Reply #29 on: September 04, 2016, 05:20:29 pm »
Subject: Cat with different palettes (ironbow&gray rainbow)
Camera: Seek Thermal on windows 10 (Thermovision 1.7.1)
Lens: Seek fixed
Image manipulation: crop, resize, noise
Camera mods: External protection, tablet pivot mount
« Last Edit: September 04, 2016, 05:22:11 pm by eternalone »
 
The following users thanked this post: jonovid

Offline frenkyTopic starter

  • Supporter
  • ****
  • Posts: 1003
  • Country: si
    • Frenki.net
Re: Thermal Imaging Gallery
« Reply #30 on: September 15, 2016, 08:44:19 am »
Camera: ThermalExpert Q1
Lens: 13mm f/1.0

Playing with rainbow palette...

Car engine:


Old house and mountains:


Chips on the pcb:


Landscape:
« Last Edit: September 15, 2016, 08:59:53 am by frenky »
 
The following users thanked this post: jonovid

Offline maex

  • Contributor
  • Posts: 13
Re: Thermal Imaging Gallery
« Reply #31 on: September 15, 2016, 09:18:50 am »
ThermApp 13mm
« Last Edit: September 15, 2016, 09:20:55 am by maex »
 
The following users thanked this post: PointyOintment, Samogon, jonovid

Offline frenkyTopic starter

  • Supporter
  • ****
  • Posts: 1003
  • Country: si
    • Frenki.net
Re: Thermal Imaging Gallery
« Reply #32 on: September 15, 2016, 10:20:48 am »
Wow that is nice.  :-+
 

Offline -jeffB

  • Regular Contributor
  • *
  • Posts: 115
Re: Thermal Imaging Gallery
« Reply #33 on: September 25, 2016, 05:56:18 pm »
Oh, man, I've wanted to do thermography on insects! I wish we could see how the colors on that butterfly correspond to its visible colors, to know how much of this is metabolically-generated heat and how much is absorption from sunlight.
 

Offline joe-c

  • Frequent Contributor
  • **
  • Posts: 350
  • Country: de
    • Joe-c.de
Re: Thermal Imaging Gallery
« Reply #34 on: October 03, 2016, 11:57:31 am »
Subject: Daughter in sandbox
Camera: ThermalExpert Q1
Lens: 6.8mm f/1.3
Image manipulation: Sharpen, Interpolation x2
Camera mods: None
Freeware Thermal Analysis Software: ThermoVision_Joe-C
Some Thermal cameras: Kameras
 
The following users thanked this post: jonovid

Offline joe-c

  • Frequent Contributor
  • **
  • Posts: 350
  • Country: de
    • Joe-c.de
Re: Thermal Imaging Gallery
« Reply #35 on: October 14, 2016, 08:37:13 pm »
Subject: Toyota Prius II, after drive with flat tyre  :phew:
Camera: ThermalExpert Q1
Lens: 6.8mm f/1.3
Image manipulation: Sharpen, Interpolation x2
Camera mods: None
Freeware Thermal Analysis Software: ThermoVision_Joe-C
Some Thermal cameras: Kameras
 
The following users thanked this post: jonovid

Offline eternalone

  • Contributor
  • Posts: 30
  • Country: us
Re: Thermal Imaging Gallery
« Reply #36 on: October 16, 2016, 02:23:56 am »
Subject: Hand trauma  |O
Camera: FlirOne on Galaxy s5 (thermal camera +)
Lens: FlirOne default
Image manipulation:
Camera mods:

Took a tumble at work and smacked my hand good. Trauma seen on right hand, middle knuckle.
« Last Edit: October 16, 2016, 02:28:39 am by eternalone »
 
The following users thanked this post: jonovid

Offline eternalone

  • Contributor
  • Posts: 30
  • Country: us
Re: Thermal Imaging Gallery
« Reply #37 on: October 16, 2016, 02:27:23 am »
Subject: Toyota Prius II, after drive with flat tyre  :phew:
Camera: ThermalExpert Q1
Lens: 6.8mm f/1.3
Image manipulation: Sharpen, Interpolation x2
Camera mods: None

Ugh....make it home ok?
 

Offline joe-c

  • Frequent Contributor
  • **
  • Posts: 350
  • Country: de
    • Joe-c.de
Re: Thermal Imaging Gallery
« Reply #38 on: October 16, 2016, 09:04:37 pm »
Ugh....make it home ok?
Do you mean i was able to repair it? Yes. a tiny hole... could be filled.
i am quite happy that a guy on a bicycle at the crossroad told me, one side on back was flat.
i drove for round about 30 minutes. Drive feeling was normal, but with windows down and radio off i was able to hear a difference.

Subject: Back Tyres after drive (right was flat, both with same scale)
Camera: ThermalExpert Q1
Lens: 6.8mm f/1.3
Image manipulation: None
Camera mods: None
Freeware Thermal Analysis Software: ThermoVision_Joe-C
Some Thermal cameras: Kameras
 

Offline Kilrah

  • Supporter
  • ****
  • Posts: 1852
  • Country: ch
Re: Thermal Imaging Gallery
« Reply #39 on: October 16, 2016, 10:07:52 pm »
Very interesting tenp difference!

A couple for me, Twin Otter before and after a flight...

TE Q1



 
The following users thanked this post: jonovid

Offline eternalone

  • Contributor
  • Posts: 30
  • Country: us
Re: Thermal Imaging Gallery
« Reply #40 on: October 23, 2016, 10:13:47 pm »
Subject: various subjects
Camera:flirone on Galaxy s5(thermal camera+)
Lens: flirone
Image manipulation: cropping
Camera mods: None
 
The following users thanked this post: jonovid

Offline eternalone

  • Contributor
  • Posts: 30
  • Country: us
Re: Thermal Imaging Gallery
« Reply #41 on: October 23, 2016, 10:29:12 pm »
Subject: Fake skull with neopixels inside
Camera: seek thermal on windows 10 tablet(thermovision)
Lens: seek default
Image manipulation: None
Camera mods: None
 
The following users thanked this post: jonovid

Offline eternalone

  • Contributor
  • Posts: 30
  • Country: us
Re: Thermal Imaging Gallery
« Reply #42 on: October 24, 2016, 04:21:53 am »
Subject: baby and a teacup
Camera: seek thermal on windows 10 tablet(thermovision)
Lens: seek default
Image manipulation: None
Camera mods: None
 
The following users thanked this post: jonovid

Offline frenkyTopic starter

  • Supporter
  • ****
  • Posts: 1003
  • Country: si
    • Frenki.net
Re: Thermal Imaging Gallery
« Reply #43 on: November 01, 2016, 03:53:38 pm »
Subject: Castle Bled
Camera: ThermalExpert Q1
Lens: 13mm f/1.0

 

Offline frenkyTopic starter

  • Supporter
  • ****
  • Posts: 1003
  • Country: si
    • Frenki.net
Re: Thermal Imaging Gallery
« Reply #44 on: November 09, 2016, 09:22:23 pm »
Subject: NiMh charger
Camera: ThermalExpert Q1
Lens: 13mm f/1.0

« Last Edit: November 09, 2016, 09:27:03 pm by frenky »
 

Offline chefkoch84

  • Contributor
  • Posts: 41
Re: Thermal Imaging Gallery
« Reply #45 on: November 09, 2016, 10:26:04 pm »
I like the stiched panorama a lot.
Almost strange that this is not board support of the FLIR software..


I attached two images made with the CAT S60 phone. ( not mine :-( )

1st is how the guys make fun to all who did not join for drinks.
2nd is my 250 quad in hoover flight. Front and Back props had different pitch, surprisingly this did not make a significant difference in temp of the motors or ESCs.
 

Offline NathanFowler

  • Regular Contributor
  • *
  • Posts: 65
  • Country: us
Re: Thermal Imaging Gallery
« Reply #46 on: November 11, 2016, 11:25:26 pm »
So the FLIR ONE iOS application allows for panoramic stiching and it appears to use the native iOS stiching method, however, without MSX blending enabled I have been unable to successfully stitch a thermal-only image.
 

Offline Jeroen3

  • Super Contributor
  • ***
  • Posts: 4067
  • Country: nl
  • Embedded Engineer
    • jeroen3.nl
Re: Thermal Imaging Gallery
« Reply #47 on: November 12, 2016, 01:21:04 pm »
Floor heating using a Flir One G2 iOS.

I also have this video of a board with a short circuit. Two transistors had a bad footprint. Causing a short.


This is what I show people when they ask why I bought this.
« Last Edit: November 12, 2016, 01:33:18 pm by Jeroen3 »
 
The following users thanked this post: BillyD, PointyOintment

Offline frenkyTopic starter

  • Supporter
  • ****
  • Posts: 1003
  • Country: si
    • Frenki.net
Re: Thermal Imaging Gallery
« Reply #48 on: November 12, 2016, 05:05:07 pm »
People often ask me if i3 T.E. Q1 is good for PCB inspection.
I can only recommend it. :-+ And since it has manual focus you don't need any additional ZnSe lens to get really close:

The subject is router board approx 15x10cm (4" x 6").

Camera: ThermalExpert Q1
Lens: 13mm f/1.0







« Last Edit: November 13, 2016, 09:34:37 am by frenky »
 

Offline joe-c

  • Frequent Contributor
  • **
  • Posts: 350
  • Country: de
    • Joe-c.de
Re: Thermal Imaging Gallery
« Reply #49 on: November 13, 2016, 01:01:21 pm »
People often ask me if i3 T.E. Q1 is good for PCB inspection.
I can only recommend it. :-+
Me too  8)

Subject: PC inside
Camera: ThermalExpert Q1
Lens: 6.8mm f/1.3
Image manipulation: Sharpen and Interpolationx2
Camera mods: None
Freeware Thermal Analysis Software: ThermoVision_Joe-C
Some Thermal cameras: Kameras
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf