Author Topic: decided the world hates me lol New direct extruder  (Read 4796 times)

0 Members and 1 Guest are viewing this topic.

Offline HobGoblynTopic starter

  • Supporter
  • ****
  • Posts: 510
  • Country: gb
decided the world hates me lol New direct extruder
« on: September 03, 2021, 05:55:47 pm »
Watched a ton of vids, decided to get myself a BIQU H2 direct drive extruder.

Contacted company to see if it was the upgraded version, they said upgraded version hasn't reached the UK yet, but if there's a problem, they will send me the upgraded gears when they arrive.

So it arrived yesterday, opened box, it is upgraded version (silver gears not black) and could hear something loose inside.  So opened it up, only to find one of the screws that holds the stepper motor on to be loose (as in not in the hole at all).

Put it in the hole, absolutely zero thread in it, surely someone must have noticed this during manufacturing etc, then again who knows.

Probably would work fine with 3 bolts holding motor on, but £72, I expect it to be undamaged on delivery.  So I returned to Amazon (3rd party seller fulfilled by Amazon), no problem there. 

But when I bought it, there was a code for 20% off, if I try to buy again it wont give me the 20% offer, but if I go to the Amazon UK website without logging on, it will.  Must be one discount per person.  Time to phone daughter and get her to buy it for me.  Why is it nothing seems to go smoothly anymore lol
 

Offline Bassman59

  • Super Contributor
  • ***
  • Posts: 2501
  • Country: us
  • Yes, I do this for a living
Re: decided the world hates me lol New direct extruder
« Reply #1 on: September 03, 2021, 10:29:29 pm »
Why is it nothing seems to go smoothly anymore lol

I'm pretty sure 3D printing is just one long continuous exercising in annoyance and frustration.
 
The following users thanked this post: HobGoblyn, Just_another_Dave

Offline CianForStuff

  • Newbie
  • Posts: 2
  • Country: ie
Re: decided the world hates me lol New direct extruder
« Reply #2 on: December 16, 2021, 06:30:49 pm »
Have had a Hameara for a while now and itts faultless. yeah its heavy but ive one on an ender 3 and it works as expected
ive been burned enough to start fo beleve the "buy once, cry once philosophy " ahahaha
 

Offline mjj

  • Contributor
  • Posts: 20
  • Country: gb
Re: decided the world hates me lol New direct extruder
« Reply #3 on: December 19, 2021, 10:17:33 am »
Why is it nothing seems to go smoothly anymore lol

I'm pretty sure 3D printing is just one long continuous exercising in annoyance and frustration.

I must admit that’s when I just need to get something done I either use a bureau or an old Stratasys printer I picked up on eBay for next to nothing which may not have the latest cutting edge resolution but just works!
 

Offline luma

  • Regular Contributor
  • *
  • Posts: 130
  • Country: us
Re: decided the world hates me lol New direct extruder
« Reply #4 on: January 19, 2022, 04:15:45 pm »
Why is it nothing seems to go smoothly anymore lol

I'm pretty sure 3D printing is just one long continuous exercising in annoyance and frustration.

Like most things, you get out of it what you put into it.  If you scoured the earth for the cheapest Chinese-made car, would you be surprised if it was unreliable and performed poorly?  Would it mean that all cars are the same?

The glut of dirt-cheap printers coming out of China is cool in that it allows people to get into 3D printing without a lot of cash up front, but there are huge tradeoffs being made and that fact should be obvious to anyone posting on this forum.  Look into a Prusa or LulzBot etc and you'll have a very different experience (and you'll pay more up front due to all the corners which are intact and uncut).
 

Offline Pineapple Dan

  • Contributor
  • Posts: 45
  • Country: ie
Re: decided the world hates me lol New direct extruder
« Reply #5 on: January 22, 2022, 05:25:09 pm »
Why is it nothing seems to go smoothly anymore lol

I'm pretty sure 3D printing is just one long continuous exercising in annoyance and frustration.

Like most things, you get out of it what you put into it.  If you scoured the earth for the cheapest Chinese-made car, would you be surprised if it was unreliable and performed poorly?  Would it mean that all cars are the same?

The glut of dirt-cheap printers coming out of China is cool in that it allows people to get into 3D printing without a lot of cash up front, but there are huge tradeoffs being made and that fact should be obvious to anyone posting on this forum.  Look into a Prusa or LulzBot etc and you'll have a very different experience (and you'll pay more up front due to all the corners which are intact and uncut).

I concur. Bought a Prusa mini last year and it has been fairly trouble free & I have used it loads, the only time I really had trouble was when I tried to use cheap-ass filament
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf