EEVblog Electronics Community Forum

Products => 3D printing => Topic started by: pcmad on April 03, 2022, 02:47:07 am

Title: Marlin 2.0.9.3 versus 1.1.9.1 efficiency on 8bit microcontroler
Post by: pcmad on April 03, 2022, 02:47:07 am
Which Marlin firmware would be more efficient on an 8 bit microcontroller i.e. Marlin 2.0.9.3 versus 1.1.9.1 when I mean efficiency I mean am efficient code running on the CPU a Ram Equivalent on the microcontroller
Title: Re: Marlin 2.0.9.3 versus 1.1.9.1 efficiency on 8bit microcontroler
Post by: Zucca on April 03, 2022, 03:43:42 am
Marlin 2.0.9.3 or the last one for the future.

If you have a 8bit ┬ÁP just just turn off some features in the config file.
With less horses you have to go light.