In the attached contains a file name: Anet_A8_Y-axis_anchor_for_T20_pulley
I created the gcode and printed it, however, one side of the legs was thinner than the other. Initially I thought my printer aborted, but, when I looked at the stl file, I noticed this was how it was created.
If I remove supporting material, the part looks normal, but, when I add support material, I see a space exists between the legs (or forks - whatever you want to call them).
This space seems to be some void that is causing more support material to be printed and reducing the leg thickness.
Can someone look at it and tell me what's wrong because I've tinkered with numerous settings and can't solve the issue.