EEVblog Electronics Community Forum

Products => 3D printing => Topic started by: strawberry on April 29, 2024, 05:09:28 pm

Title: SLA print warping
Post by: strawberry on April 29, 2024, 05:09:28 pm

warping happen after some day. like some internal stress???uneven printing temperature?? it comes out almost perfect but then it is meh
I broke one sample but got worse(couldn't put peaces back)
one sample came out fine

wall thickness 3mm L=200mm H=30mm box
acrylic resin

Title: Re: SLA print warping
Post by: thm_w on April 29, 2024, 08:35:28 pm

Did you UV cure?

https://www.linkedin.com/advice/3/how-do-you-avoid-warping-cracking-your-sla-prints (https://www.linkedin.com/advice/3/how-do-you-avoid-warping-cracking-your-sla-prints)