« previous next »
Pages: [1]   Go Down

Author Topic: BoardStation to Altium??  (Read 4164 times)

0 Members and 1 Guest are viewing this topic.

Offline Mikekoz13Topic starter

  • Contributor
  • Posts: 43
BoardStation to Altium??
« on: January 31, 2013, 05:32:01 pm »
Hi all-

I'm new here but read thru quite a few threads before registering.

Hopefully someone can give me some kind of answer on this. I have (9) old layouts that were completed in our old software, PANTHEON, a couple of years ago..
I'd like to get those designs into Altium for reuse. I'd like to have full functionality once there.

Is there any way to do this?
Thanks in advance for any help.
Logged
 

Offline free_electron

  • Super Contributor
  • ***
  • Posts: 8550
  • Country: us
    • SiliconValleyGarage
Re: BoardStation to Altium??
« Reply #1 on: January 31, 2013, 06:47:47 pm »
save as odb++ and pull it in through the Camtastic module.
Logged
Professional Electron Wrangler.
Any comments, or points of view expressed, are my own and not endorsed , induced or compensated by my employer(s).
 

Offline Mikekoz13Topic starter

  • Contributor
  • Posts: 43
Re: BoardStation to Altium??
« Reply #2 on: March 26, 2013, 07:11:27 pm »
So I'm back to this project. I read my gerber and drill file into Camtastic and then went thru the reverse engineering process that Altium has in their Help.

One problem.... most of the unplated drill holes did not convert from the Camtastic files to the new PcbDoc file. They are in the Camtastic document but they didn't convert to the PcbDoc.

Any idea why?
Logged
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee