« previous next »
Pages: [1]   Go Down

Author Topic: Drill Chart Vs location on the PCB  (Read 1214 times)

0 Members and 1 Guest are viewing this topic.

Offline gogomanTopic starter

  • Regular Contributor
  • *
  • Posts: 123
Drill Chart Vs location on the PCB
« on: July 28, 2019, 11:28:15 am »
Hello,

the drill symbols are small and difficult to identified on the drill layer can  they be resized?
Is there a method to select symbols from the chart and have them high lighted on the drill layer?

thanks
 
Logged
 

Offline ddavidebor

  • Super Contributor
  • ***
  • Posts: 1190
  • Country: gb
    • Smartbox AT
Re: Drill Chart Vs location on the PCB
« Reply #1 on: July 28, 2019, 12:05:02 pm »
Hello,

Please take a look at the Draftsman functionality, it has some more advanced drill drawings.
Logged
David - Professional Engineer - Medical Devices and Tablet Computers at Smartbox AT
Side businesses: Altium Industry Expert writer, http://fermium.ltd.uk (Scientific Equiment), http://chinesecleavers.co.uk (Cutlery),
 

Offline Pseudobyte

  • Frequent Contributor
  • **
  • Posts: 293
  • Country: us
  • Embedded Systems Engineer / PCB Designer
Re: Drill Chart Vs location on the PCB
« Reply #2 on: July 29, 2019, 05:55:44 pm »
Double click on the drill table.

Click on the "Drill Symbols" button.



Symbol size is in the bottom left.

Logged
“They Don’t Think It Be Like It Is, But It Do”
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee