Hi, Please could anyone help with the following..or know of video links for it?
1…How can you be sure your design rule setting don’t get wiped?....can you save it as a file?
2…Just pushed my components to PCB, and many f them are coated in green crosses, and appear totally green when I “scroll out”. Do you know what this is?
3….I added a Mech Layer 22, which I used as a component courtyard in the PCB component editor, but now mech layer 22 has mysteriously disappeared from the “view configurations” panel…do you know why or how?
4…In schem editor, I routed a track over another one, and it joined to it, but that wasn’t wanted…how avoid this.?
5…In PCB component editor, I am trying to move a SMD pad by just 0.1mm…but it wont let me, even though the grid is set for 0.1mm…..it instead snaps the pad to the nearest line….how to avoid this?
6…How do you add a designator to the component footprint?
7…If you want to place a keepout in the gap between the pads of an 0805, is it just a case of drawing a rectangle in the gap, made of “keepout” net?
8…I wish to make a SOIC 8 footprint by setting the grid to 1.27mm, then just move the pads by one “jot”, to get the line of 4 pads…..but it wont do it..it woves the copied pad to the nerest gris mark, rather than just moving 1.27mm in the Y direction. How to solve?