EEVblog Electronics Community Forum
Electronics => PCB/EDA/CAD => Altium Designer => Topic started by: Zeigren on November 17, 2017, 10:53:38 am
-
I plan on using a Cyclone 10 LP in an upcoming project so I started looking around to see if there were any AD libraries for it, but I can't seem to find any. I figured I would ask around first before I spend the time cobbling one together :P I'm specifically looking at the 10CL006ZE144I8G if you're curious.
UPDATE: Finally found 'em, just didn't go far enough down the rabbit hole >.> https://www.altera.com/support/support-resources/download/board-layout-test/pcb/pcb-cadence.html (https://www.altera.com/support/support-resources/download/board-layout-test/pcb/pcb-cadence.html)
Still weird to get an Altera link but have Intel plastered all over the website. They're for Cadence and it's just the schematic symbol but it works. Took the footprint from a Cyclone IV from Altium's design content and slapped it on there so now I'm good to go :)