Author Topic: Drill Chart Vs location on the PCB  (Read 387 times)

0 Members and 1 Guest are viewing this topic.

Offline gogoman

  • Regular Contributor
  • *
  • Posts: 68
Drill Chart Vs location on the PCB
« on: July 28, 2019, 11:28:15 am »
Hello,

the drill symbols are small and difficult to identified on the drill layer can  they be resized?
Is there a method to select symbols from the chart and have them high lighted on the drill layer?

thanks
 
 

Offline ddavidebor

  • Super Contributor
  • ***
  • Posts: 1139
  • Country: it
    • Fermium LABS website
Re: Drill Chart Vs location on the PCB
« Reply #1 on: July 28, 2019, 12:05:02 pm »
Hello,

Please take a look at the Draftsman functionality, it has some more advanced drill drawings.
Davide Bortolami,
Fermium LABS srl
 

Offline Pseudobyte

  • Regular Contributor
  • *
  • Posts: 129
  • Country: us
  • Embedded Systems Guy
Re: Drill Chart Vs location on the PCB
« Reply #2 on: July 29, 2019, 05:55:44 pm »
Double click on the drill table.

Click on the "Drill Symbols" button.



Symbol size is in the bottom left.

“They Don’t Think It Be Like It Is, But It Do”
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf