Electronics > Altium Designer

Found part on Digikey.... Altium can't find it!!

(1/1)

Stupid Bear:
Found this part on Digikey...
https://www.digikey.com/en/products/detail/linear-integrated-systems-inc/SST201-SOT-23-3L-ROHS/14312266

But when I do a manufacturers part search it doesn't come up.  Can I manually insert it and create a link to Digikey like Altium does. I can manually add the properties but can I also add the link at the bottom with the datasheet button or is that just something that Altium does on its own?

ahbushnell:

--- Quote from: Stupid Bear on January 30, 2023, 05:08:49 am ---Found this part on Digikey...
https://www.digikey.com/en/products/detail/linear-integrated-systems-inc/SST201-SOT-23-3L-ROHS/14312266

But when I do a manufacturers part search it doesn't come up.  Can I manually insert it and create a link to Digikey like Altium does. I can manually add the properties but can I also add the link at the bottom with the datasheet button or is that just something that Altium does on its own?

--- End quote ---
Create your schematic part which I assume you have done.  Then go to Manufacturer part search and put in the digikey part number and search.  From there you can down load the info.  I just tried it on one of the parts I created. 

ahbushnell:
I just tried it with your part and nothing.  :<  There are three types of parts depending on the packaging.  I wonder if that has something to do with it.  I guess I would do it manually.  Or try mouser or something else.  Good luck
Andy

Navigation

[0] Message Index