Author Topic: Librarys  (Read 4504 times)

0 Members and 1 Guest are viewing this topic.

Offline modernjack3

  • Contributor
  • Posts: 37
  • Country: at
« on: February 03, 2016, 09:32:17 am »
Can somebody tell me how to Import librarys into Altuim 14.3?

And I am looking for a library that includes the IC "SN74HC595N"...

Offline tszaboo

  • Super Contributor
  • ***
  • Posts: 6208
  • Country: nl
  • Current job: ATEX product design
Re: Librarys
« Reply #1 on: February 03, 2016, 10:00:55 am »
The TI library has that. It was shipped with Altium by default, at least the last version I've used. Just look around in folders. Otherwise, there is a library tab. And you can always just drag the file to the window.

Offline jmarkwolf

  • Regular Contributor
  • *
  • Posts: 106
Re: Librarys
« Reply #2 on: February 03, 2016, 12:23:48 pm »
Select Design then Add/Remove library.

Browse to the folder holding the library in question and select it.

Offline mov-jump

  • Contributor
  • Posts: 26
  • Country: ir
BS170 Library
« Reply #3 on: February 27, 2016, 04:18:10 pm »
I need BS170 schematic library.
please help me.

THX in advance

Offline D3f1ant

  • Frequent Contributor
  • **
  • Posts: 346
  • Country: nz
  • Doing as little as possible, but no less.
Re: Librarys
« Reply #4 on: February 27, 2016, 08:11:29 pm »
I think Altium stopped bundling their comprehensive library catalog with the installer. You can access them if you log into Altiums vault or download them individually from the website. In the time taken to log in here and ask for a particular part, you could have created the part in your own custom library.

Offline Christe4nM

  • Supporter
  • ****
  • Posts: 249
  • Country: nl
Re: Librarys
« Reply #5 on: March 03, 2016, 04:37:35 pm »
Learn to create your own. This is an important part of working with a schematic/PCB CAD suite. When using existing libraries you need to check the symbol and footprint against your datasheet anyway. The chance that your part doesn't fit is always possible if you don't.

So use that datasheet and make your own. It's usually about 5 minutes each for your schematic symbol and your footprint.

Here's the link:

Offline mov-jump

  • Contributor
  • Posts: 26
  • Country: ir
Re: Librarys
« Reply #6 on: March 09, 2016, 08:54:55 am »
thank you engineers.

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo