Interactive routing collision problem

[Motonaut]

I have this really weird problem where I seem to have disabled interactive routing collision avoidance. When I route my traces my routing neither pushes or hugs other objects and it does not give any live DRC errors for overlapping nets. I have checked my preferences and tried several modes for conflict resolution. I cant figure out what I have enabled/disabled to create this problem. 

Please help out. Thanks

[thm_w]

Is "Online DRC" enabled

https://www.altium.com/documentation/altium-designer/design-rule-checking-ad?version=18.1

[Motonaut]

It wasnt for clearance and short circuits. So now it detects live clearance and short circuits but the interactive routing still wont hug or push.

EDIT: Just got a weird interactions where the interactive routing pushed vias in the same net.

[exmadscientist]

It sounds like perhaps you have the Interactive Routing Conflict Resolution option set to "Ignore Obstacles"? This can be very useful for some work, but is usually not what one wants.

[Motonaut]

Here is my Interactive Routing settings: http://prntscr.com/26x0e5l

[Pseudobyte]

I stopped using the regular routing command and switched to quick route, more responsive, more predictable.

[tooki]

Here is my Interactive Routing settings: http://prntscr.com/26x0e5l

Are you aware that those settings are only for selecting which modes are available to be selected? You still have to select the mode you want. Press Shift-R while routing to cycle between modes.