EEVblog® Electronics Community Forum

Electronics => PCB/EDA/CAD => Altium Designer => Topic started by: Balain on September 27, 2025, 05:24:53 pm

Title: Schematic parameters spliting issue
Post by: Balain on September 27, 2025, 05:24:53 pm

The issue: On the schematic, parameters used to appear separately (Value, Voltage, Package, Tolerance)(Screenshot 1), but after PLM integration they are merged into one long string. This makes them overlap and hard to read.(Screenshot 2)

From what I understand, the actual PLM integration mapping (Altium params → ENOVIA attributes) is only in the Workspace Admin (browser) → Settings → PLM Integration, or via XML if on Server.

Can anyone confirm if that’s correct, and share docs/examples for setting up the ENOVIA connector mapping so schematic parameters stay split as before?

Or is there any Altium Delphi script for this where i cant split the parameters. kindly help

Title: Re: Schematic parameters spliting issue
Post by: thm_w on September 29, 2025, 08:21:00 pm

If you click on properties of the part and look at the parameters what do they look like.

Title: Re: Schematic parameters spliting issue
Post by: free_electron on October 03, 2025, 09:33:16 pm

where are you storing the library  on A365 or in Enovia ? This is an Enovia issue.

Title: Re: Schematic parameters spliting issue
Post by: Balain on October 29, 2025, 03:48:42 am

We are storing it on Altium, only after the integration the the parameters are overlapped