Clearance Rules Pad and Wire

[guest_VR]

Hi everybody,

I try to use different clearance rules on different layers.
Such as " (OnLayer('Layer 2') AND InNetClass('Logic'))  " and "(OnLayer('Layer 2') AND InNetClass('HV')) " : 3mm clearance.

so far it acually works all right for the wired nets, but not for the PADS and vias.
The pictue below shows Layer 2 and i am missing the 3mm around the pads and the via i placed in the middle of them!

Does anyone has an idea why it is like that?

Thx for your help

[guest_VR]

That was very helpful - I missed that Pads are multi-layer objects.
But now it works - thx for your help