Author Topic: v-score and rout paths placement, AD summer 09  (Read 6451 times)

0 Members and 1 Guest are viewing this topic.

Offline m4l490nTopic starter

  • Contributor
  • Posts: 17
v-score and rout paths placement, AD summer 09
« on: August 09, 2011, 02:30:23 pm »
Hi, I'd like to know how can I make a panel in AD S09, specifically, how do I put the v-scoring and routing paths. I've used the "Embedded Board Array/Panelize" but I don't know how to put the v-scoring and the routing paths.

Can you help me with this. THANKS!! :)
 

Offline thmjpr

  • Regular Contributor
  • *
  • Posts: 175
  • Country: ca
Re: v-score and rout paths placement, AD summer 09
« Reply #1 on: August 14, 2011, 09:30:58 am »
Talk to whoever will make the board. It may be easier if they do it.

A separate mechanical layer for routing paths is quite standard. You could use one layer each for v-score and route, or even just a different size trace (with a legend).

But your routing path should already be part of your individual board design?
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf