Author Topic: Kicad interactive bom alternatives (AmpHour #561)  (Read 2737 times)

0 Members and 1 Guest are viewing this topic.

Offline Jeroen3

  • Super Contributor
  • ***
  • Posts: 3883
  • Country: nl
  • Embedded Engineer
Kicad interactive bom alternatives (AmpHour #561)
« on: October 14, 2021, 06:40:05 am »
Interactive bom in kicad is a nice addition and should be standard in all EDA tools!

However, there are some more third party tools. I always use VisualPlace to manually place boards.

I modified the pick&place list creator ulp for Fusion360 yesterday.

There is also SMT Assistant, which was mentioned before here on the forum, which is more limited. Doesn't use gerbers but a bitmap, not very good for big boards.

I'm sure there must be more...
« Last Edit: October 14, 2021, 06:43:47 am by Jeroen3 »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo