Electronics > Beginners

240V to 120V Step-Down Transformer

<< < (2/2)

bigbadwolv:
Thank you all for the input so far!

--- Quote from: andy3055 on December 06, 2019, 10:53:06 pm ---You will be better off buying one in Australia rather than lugging it from here. All you need is something that is either 650 Watt or higher, given the charger draws 650 Watt.

--- End quote ---
Unfortunately, they aren't available in Aus, which is why I lugged it from over there  :-\


--- Quote from: tunk on December 06, 2019, 10:56:18 pm ---You might be able to modify it:
https://www.eevblog.com/forum/beginners/converting-a-cordless-drill-charger-%28hitachi-uc18yksl%29-from-110v-to-220v/

--- End quote ---
True, but I don't think I'm going to play around with it at this stage - just want a simple solution that I can't really stuff up!


--- Quote from: Zero999 on December 06, 2019, 11:23:27 pm ---A transformer won't change the frequency, although that shouldn't matter.

I can't recommend any specific brands. I'd just go to a known good electronic/electrical distributor and buy one. An autotransformer will be fine, since it doesn't need isolation and will be smaller and cheaper than an isolating transformer. It would be a good idea to use a transformer with a slightly higher power rating than the vacuum, just to be safe, so 750VA or bigger will be fine.

--- End quote ---
Thanks for the info, only posted the frequency in case it was relevant. I'm hoping that the difference between 50Hz (here ins AU) and 60Hz (in the US) shouldn't make too much of a difference. 


--- Quote from: james_s on December 06, 2019, 11:52:27 pm ---650W?? Surely that's a typo? My Roomba charging docks draw at least an order of magnitude less than that.

--- End quote ---
Yeah I thought the same - I have been in contact with their support, awaiting a response from someone technical...

langwadt:

--- Quote from: james_s on December 06, 2019, 11:52:27 pm ---650W?? Surely that's a typo? My Roomba charging docks draw at least an order of magnitude less than that.

--- End quote ---

maybe it has a motor for a vacuum to empty the robot?

andy3055:
Looks like this has a self-emptying feature that has a separate motor in the charging unit. That may be why it draws so much. Never seen one like this but they seem to make things more and more feature rich!

Your best bet may be to get a suitable transformer and make your own box with a US type outlet.

james_s:
Ah, well that could explain it. If that is the case then a triac dimmer type circuit ought to work for the motor, every mains powered domestic vacuum I've seen has a universal motor that ought to work fine on one of those. Then you could look at the power supply for the rest of the unit, it may be easily converted to 240V, or replaced with a similar spec power supply.

bigbadwolv:

--- Quote from: andy3055 on December 07, 2019, 01:54:37 am ---Looks like this has a self-emptying feature that has a separate motor in the charging unit. That may be why it draws so much. Never seen one like this but they seem to make things more and more feature rich!

Your best bet may be to get a suitable transformer and make your own box with a US type outlet.

--- End quote ---

--- Quote from: langwadt on December 07, 2019, 01:45:41 am ---
--- Quote from: james_s on December 06, 2019, 11:52:27 pm ---650W?? Surely that's a typo? My Roomba charging docks draw at least an order of magnitude less than that.

--- End quote ---

maybe it has a motor for a vacuum to empty the robot?

--- End quote ---

I believe Andy is correct the dock does have an auto-empty feature which sucks the crap out of the robot - I assume the motor is in the docking station. 

Thank you for the responses - I will have to have a look into the proposed solutions and see which way I want to go.

Navigation

[0] Message Index

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod