| Electronics > Beginners |
| A peak detector that restarts (multiple peaks) |
| << < (3/3) |
| unitedatoms:
--- Quote from: baksuz on March 04, 2019, 06:19:29 pm ---First I would like to thank you for you time, As I said I have 5V AC 10kHz, I forget to mention that is modulated signal, It will look like this [5][5] I need to detect all peaks to, and in the end I need to connect all that peaks to get a new signal, that will in the end be the envelope of this signal that I mentioned before. My plan is to build a Non-Inverting Op-Amp Level Shifter(change of plans) to get voltage to 0-3,3 V and connect it to stm32 , and do all programming where my output will be as mentioned the envelope. I am a bit skeptic about all of that, cause I already have bought all material. --- End quote --- Your asking, what analog circuit can form single ended (positive quadrant) signal representing envelope of AM modulated signal with carrier of 10kHz ? This is AM detector. https://www.st-andrews.ac.uk/~www_pa/Scots_Guide/RadCom/part9/page2.html |
| Navigation |
| Message Index |
| Previous page |