| Electronics > Beginners |
| Amprobe resistor identification |
| (1/5) > >> |
| Captnshacky:
Could someone here help me identify this resistor? If it is even a resistor. Its directly solder to the positive lead trace of an Amprobe ACD -41PQ. I asked Digikey to identify and they say the color bands do not make any sense. Which is the same conclusion I got. Any help would be great. Thanks |
| radiolistener:
according to color code calculator, this is 10.2 Ohm ±3% resistor: https://www.allaboutcircuits.com/tools/resistor-color-code-calculator/ |
| Captnshacky:
Thanks for the help. Would this be a 4 or 5 band color code? Just for my future reference. |
| Captnshacky:
This is what Digi-Key came up with. They said is was the closets choice. https://www.digikey.com/products/en/resistors/through-hole-resistors/53?k=10.2+OHMS+AXIAL&k=&pkeyword=10.2+OHMS+AXIAL&sv=0&pv2085=u10.2+Ohms&sf=0&FV=ffe00035&quantity=&ColumnSort=0&page=1&stock=1&pageSize=25 |
| retiredcaps:
A picture of that resistor and its surrounding area might help us help you? |
| Navigation |
| Message Index |
| Next page |